Monday, 2018-10-08

*** ChanServ sets mode: +v T405:32
mgrovermorning all08:51
mgroverr0kk3rz, how would I run a release build on the gitlab pipeline? since its all already set to release. i just want it to do the whole disabling telnet access08:51
r0kk3rzmgrover: i have no idea how thats supposed to work08:54
r0kk3rzbut the ci just runs mic, so as long as the .ks is right08:55
mgroverr0kk3rz, hmm okays ill take a look at that, thanks :)08:58
*** mgrover is now known as ghosalmartin08:59
malghosalmartin: just make sure .ks uses testing repos and it should be fine09:47
ghosalmartinmal: well when I did a local build on my machine it pumped out a release one and it wasnt testing I think10:03
ghosalmartinit was using nemo:devel:hw:lge:bullhead10:03
ghosalmartinmal: also the focus issue I had earlier about minimizing. its not that. its just a small delay before focus is fully working10:04
malghosalmartin: it's .ks what determines the build10:06
ghosalmartinmal: hmm okays10:16
Mister_Magisterghosalmartin: in droid-configs patterns there are patterns for development debug tools10:20
ghosalmartinMister_Magister, well that stop it attempting to go release?10:20
Mister_Magisternah im just saying cause you were talking about disabling telnet and stuff10:21
r0kk3rzghosalmartin: make a new branch on the ci for testing/release10:23
ghosalmartinr0kk3rz, will do, atm am struggling to compare the diff between my ks and the servers10:31
r0kk3rzthe one on the ci might be wrong, i created them all in perhaps a bad way :)10:34
ghosalmartinahh fair enough :P10:44
ghosalmartinmal: any idea why when building droid-configs my sparse/etc/dconf isn't being pulled in?11:42
ghosalmartinis there a special rule around it?11:42
malghosalmartin: it should work, what do you mean no being pulled in? not used or not on device?11:43
ghosalmartinthe obs build isn't including it11:43
ghosalmartinhttp://repo.merproject.org/obs/nemo:/devel:/hw:/lge:/bullhead/sailfish_latest_armv7hl/armv7hl/11:43
ghosalmartinfrom https://github.com/ghosalmartin/droid-config-bullhead11:43
ghosalmartinahh maybe this bit "droid-config-bullhead-sailfish.noarch: W: non-conffile-in-etc /etc/dconf/db/vendor.d/jolla-camera-hw.txt"11:44
malghosalmartin: it's here http://repo.merproject.org/obs/nemo:/devel:/hw:/lge:/bullhead/sailfish_latest_armv7hl/noarch/11:48
malghosalmartin: in the droid-config-bullhead-sailfish11:48
ghosalmartinahhh thanks11:49
malghosalmartin: message you pasted said it already "droid-config-bullhead-sailfish.noarch"11:50
ghosalmartinyeah think I was being a bit of an idiot :P11:50
malit happens to all of us sometimes11:51
Mister_Magistermal: very often to me xD12:17
taixzomal: any update on matissewifi?14:00
maltaixzo: no14:00
malit's a problem that I want to be too perfect before sharing anything14:01
mal*want it to be14:01
ghosalmartinmal: videos now broken. works fine when you hit record, but when you hit stop it shows the camera has stopped working, guessing I run with GST_DEBUG=6?15:08
malghosalmartin: check logcat15:09
malghosalmartin: does it show something about waiting for audiopolicy service15:10
ghosalmartin well gst gives me this "droidcamsrc gstdroidcamsrcdev.c:461:gst_droidcamsrc_dev_frame_available:<camera_source> failed to acquire buffer from pool: flushing"15:10
ghosalmartinlogcat is next15:10
ghosalmartinhttps://pastebin.com/GnLAQBMC15:11
malghosalmartin: did you remember to remove that one codec registry you mentioned yesterday, not sure what you meant by that15:12
malghosalmartin: is that hybris-14.1 base?15:13
ghosalmartinmal: yes 14.1 base, and this is a fresh install so should be legit15:17
ghosalmartinthe registery is based on this15:18
ghosalmartinhttp://www.merproject.org/logs/%23sailfishos-porters/%23sailfishos-porters.2018-04-17.log.html#t2018-04-17T09:59:1615:18
ghosalmartinI just wanted to leave the port with a somewhat stable zip before I transitioned to 15.115:20
malghosalmartin: you still have tihs https://github.com/ghosalmartin/droid-config-bullhead/blob/master/sparse/etc/xdg/gstomx.conf15:20
ghosalmartinyeah just deleted it and rebooted, lets see how it plays15:20
ghosalmartinno dice :/15:21
malremove registry again just in case15:21
malghosalmartin: it worked yesterday but not anymore in the new build?15:21
ghosalmartinI dont think it ever worked yesturday I never tested video recording15:22
ghosalmartinjust playing in gallery and browser15:22
malok15:22
ghosalmartini remember the nexus 5 had this issue years ago15:22
malthe error is "storeMetaDataInBuffers (output) failed"15:23
malbut not sure if that is critical15:23
ghosalmartinsome mention of it in logs in 201615:24
ghosalmartinso probably not?15:24
malI think that should not be an issue in 14.1, it was an issue in 12.1 and 13.015:24
ghosalmartinill comb the logs15:25
ghosalmartinhmm also no focus in videos but thats another issue for later :P15:26
ghosalmartinthis is an interesting pastebin https://pastebin.com/AsybH5u815:27
ghosalmartindmesg even15:27
vknechtcam crash after recording reminds me this https://github.com/sailfishos/droidmedia/pull/1115:29
malyes but there is no waiting messages in logcat15:30
ghosalmartinill do a grep jic15:30
ghosalmartinclean15:30
ghosalmartinthere still calls like this "E ACodec  : [OMX.qcom.video.encoder.avc] storeMetaDataInBuffers (output) failed w/ err -101015:31
ghosalmartin" is it normal its tryna use OMX?15:31
malit's using OMX internally15:32
malcheck the media codec xml files to see what is in those15:32
ghosalmartinseems pretty reasonable https://pastebin.com/SHAeNE8T15:34
ghosalmartinmal: i wonder if its cause I forced HAL115:39
malnot sure, that shouldn't affect codecs but you can try15:40
ghosalmartinwell this is where its going badly wrong :P https://pastebin.com/kUuWU0eU16:23
*** ChanServ sets mode: +v T417:07
piggzmal: fetch https://github.com/piggz/harbour-advanced-camera for a nicer UI17:39
r0kk3rz'advanced-camera' boooring, it should be piggz-o-vision17:41
piggzr0kk3rz: i accept PRs ;)17:43
r0kk3rz:D17:44
r0kk3rzespecially since it will only work on piggz-o-vision enabled devices17:44
piggz...in motion.....17:45
r0kk3rznow in technicolour!17:45
mal@adampigg looks better already, the button still need some icons17:55
mal@adampigg or maybe just add icons instead of buttons17:56
T4<adampigg> Mal: obv looking for suitable icons :)17:59
mal@adampigg it seems the default theme has icons for many of the camera features18:08
mal@adampigg /usr/share/themes/sailfish-default/meegotouch/z1.0/icons/icon-camera*18:08
T4<adampigg> Ah, well spotted18:08
kimmolibut you need icon-advanced-camera  :P18:09
malyes, but we can take what we can from default theme and add new ones we need with similar style18:09
kimmolito your own work properly with highlight, youll need https://github.com/kimmoli/paint/blob/master/src/IconProvider.h18:10
kimmolii.e. this https://together.jolla.com/question/44325/iconbutton-how-to-use-own-icons-with-highlight/18:11
T4<adampigg> (Photo, 1280x960) http://149.202.119.142:9090/2svuUAWO0J.png18:52
piggzmal: r0kk3rz: thoughts ^18:52
piggzactually, hang on!18:53
r0kk3rzits black?18:54
T4<adampigg> (Photo, 1280x720) http://149.202.119.142:9090/RDzIL0hO7g.png18:54
piggzthats better18:54
piggzr0kk3rz: aye, i said hang one!18:54
piggz:D18:54
Mister_Magisterpiggz: seems nice18:54
Mister_Magisterpiggz: can i rework ui later?18:54
piggzMister_Magister: sorry, mido exclusive18:55
piggz:18:55
Mister_Magisterpiggz: ANGERY18:55
piggz:D18:55
piggzright, fix qtmultimedia18:55
* Mister_Magister is mad18:55
r0kk3rz:D18:55
Mister_Magisterpiggz: i mean sauce is available and i could rework ui for you18:55
piggzsure, i accept PRs ..18:56
piggzjust need to get it more functional18:56
Mister_Magistercause ui is 100% not sailfishy18:56
Mister_Magistertherefore ugly18:56
Mister_Magisterno offence :P18:56
piggzneither is the default camera ui18:57
piggzu need to see it in actions ... buttons slide in, its quite nice18:57
Mister_Magisterdefault camera is18:57
Mister_Magisteri would put buttons in like panel18:57
piggzanyway .... less form over functionf or now18:57
Mister_Magistersec18:57
Mister_Magisterfirst working18:57
Mister_Magisterthen looking18:57
piggzi need focus mode, flash mode, resultiuon selection and WB selection18:58
Mister_Magisterpiggz: in silica compnments app you can see panels18:58
Mister_Magisteri would place buttons in itr18:58
Mister_Magisterand make it slide in on slide gesutre18:58
Mister_Magisterthat would be sailfishy18:59
r0kk3rzoff you go then18:59
Mister_Magisterpiggz: dont you get concept of talk?18:59
Mister_Magisterpeople talk sometimes you know19:00
piggzaye, but im also waiting for my son to finish football practice ;)19:00
Mister_Magisterpiggz: heh19:00
piggzMister_Magister: if you have ideas, i will accept them, when im at that stave19:00
piggzs/stage19:00
Mister_Magisterpiggz: so that was an idea19:01
Mister_Magisterbut no space  in my time for doing it19:01
Mister_Magistermaybe someday19:01
malpiggz: quite ok, should we even have option to hide the button, is it too much if those are always visible like in jolla-camera19:18
piggzmal: but it slides in looking cool .. even considered making htem slide in after eachocer :D19:20
malpiggz: should we have a similar swipe method to get to image/video slideshow?19:20
piggzmal: maybe ... after basic functions tho!19:21
piggzmal: so, the 'supported exposure' problem is here... https://git.merproject.org/mer-core/qtmultimedia/blob/mer-5.6/src/plugins/gstreamer/camerabin/camerabinexposure.cpp#L7619:55
piggzshould i...19:55
piggz1) return all as supported regardless.19:55
piggz2) figure out how to pass down to gst-droid19:55
piggz?19:55
piggz(i already know ma;'s answer tho!)19:55
r0kk3rzyou should probably be getting this stuff in for qt5.919:57
malpiggz: maybe something like m_session->camerabin()->get_property after addig suitable property gst-droid for the various lists of supported features20:25
piggzmal: flash selection works...that was easy20:34
piggzwhate balance modes seem pretty standard, probably no need to query them20:36
abransonpiggz: what an exciting new app :DD20:45
piggzabranson: it will only work if you take my patches ;)20:46
abransonI think I saw one of those qtmultimedia properties that really does query below, though I also found out that gst-droid isn't passing many possible values up either20:47
piggzabranson: i have patches already for qtmultimedia, camerabin2, gst-plugins-bad and gs-droid20:50
abransoncrumbs ;)20:50
piggzabranson: links are here https://build.merproject.org/project/show/home:piggz20:52
abransonpiggz: there was an interesting focus mode I saw the other day too - edof. http://androidxref.com/8.1.0_r33/xref/frameworks/base/core/java/android/hardware/Camera.java#239020:56
piggzabranson: do you think you'll accept the patches? should I open bugs for them to document?21:03
abransonpiggz: sure, they're even very low impact so far. couple of typos and formatting issues is all I see21:07
piggzabranson: more duscussions tomorrow, im off work21:16
abransonpiggz: ok, if you make the PRs then I'll comment where I think needs tweaks. looks good on the whole though21:17
piggzabranson: so, i need a way to query gst-droid...soemthing like mal suggested21:18
piggzand if you think of anything else21:18
T4<adampigg> (Photo, 1280x720) http://149.202.119.142:9090/u49wrVuywi.png21:19
piggzresolution is an easy icon  to make121:19
piggz!21:19
piggzlaterz....21:19
abransonpiggz: tra21:22

Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!