Saturday, 2019-08-31

electro5751hi all07:29
electro5751r0kk3rz, do you know where can be the firmware location of a samsung device ?07:31
electro5751the bluetooth is not again working properly07:32
electro5751IS it possible to start navigation offline with puremaps ?07:44
electro5751error occured while loading current map07:44
r0kk3rzits probably just got the wrong filename09:15
T42<adampigg> r0kk3rz: when using meta packages, what is the format of the package name to use in the kickstart file .... ie, currently it is @<description of pattern>09:18
T42<adampigg> does it stay as @<description of meta> or just -<name of meta> ?09:18
mal@adampigg what did you ask me yesterday?09:23
piggzmal: its ok, i fixed .... build issues on obs09:23
piggzvery early09:23
piggzgrep conflict with busybox-symlink-grep09:24
piggzi added ignore: line to priject config09:24
malpiggz: ok, prefer or ignore is needed for that09:28
piggzmal: its a little odd, elros had a similar issue a while back, its was just in the latte config build, why would it just start doing that?09:29
piggzmal: what provides sailfish-porter-tools ?09:44
r0kk3rzpiggz: just the package name is fine09:47
piggzr0kk3rz: obvs, owever....Warning[08/31 09:42:36] : repo problem: nothing provides sailfish-porter-tools needed by jolla-configuration-dontbeevil-0.0.1+master.20190830171308.8e9ec35-1.3.1.jolla.armv7hl,09:48
piggzso, am i missing a repo?09:49
r0kk3rzthis is on obs?09:49
piggzor has that packag ebeen removed?09:49
piggzr0kk3rz: porters-ci build09:49
r0kk3rzporter tools is a patter iirc09:49
piggzis it a pattern on jolla repos, or ours?09:50
r0kk3rzshould be in common09:51
piggzr0kk3rz: nope, its part of DCD09:51
piggzso, in a patternless system, id have to re-create that09:51
r0kk3rzi dont remember having to09:53
r0kk3rzbut maybe i did09:53
piggzive just stuck the packages in jolla-confiugration-dontbeevil for now09:54
r0kk3rzor i just removed porter tools :)09:55
piggzyes, i know
malpiggz: sailfish-porter-tools comes from config submodule10:04
piggzi know :)10:04
Mister_Magistersoooo, what was needed for rendering on sf again?10:29
Mister_Magisterfaq-hadk is dead10:29
r0kk3rzpress f to pay respects10:31
Mister_MagisterF in the chat10:32
Mister_Magisterany backup available?10:32
r0kk3rzonly one i did ages ago it would seem10:33
Mister_Magisterwhy did we use deprecated pad anyway10:33
r0kk3rzbecause we're idiots?10:34
Mister_Magistersoo can someone remind me how rendering on sf was done?10:38
piggzfinally, dontbeevil CI build done using meta packages12:06
rinigusasked on sfos channel yesterday, but had no reply... do we have issues at OBS currently? for some reason one of my apps refuses to build and error messages in the log are rather odd12:26
piggzrinigus: what is the error ... is it early on12:26
piggzrinigus: yup,same as me...12:27
piggzadd this to project conifg12:27
piggzIgnore: busybox-symlinks-grep12:27
rinigusis this now needed in all projects?12:27
T42<DylanVanAssche> Any suggestion how you can use python 3 in OBS RPM spec? I tried `BuildRequires: python3` but that returns unresolvable.12:28
piggzrinigus: well, im not sure, i just added it as a workaround, lbt will maybe know more12:30
riniguspiggz: thanks!12:30
T42<adampigg> @DylanVanAssche BuildRequires:  python3-devel12:31
T42<DylanVanAssche> @adampigg Thanks! Will try :P12:32
T42<adampigg> thats what mesa uses12:32
piggzrinigus: my build was i486 too ... maybe its just that arch12:32
riniguspiggz: no, its the same for arm.12:33
riniguspiggz: now at least it fails with some "reasonable" error. let's see...12:35
riniguswith the update of qt coming really soon now, I don't have to worry 'bout qt5.6 anymore. right?12:39
rinigusoops, wrong distro :)12:39
Mister_Magisterrinigus: xdd12:50
piggzrinigus: "really soon"(tm)12:56
T42<DylanVanAssche> hmmmm it needs the `future` module to fix the built appearently (installable with pip) for Python 2, weird that python3-devel is not fixing the issue, since future = python 3 :D12:58
Mister_Magisterpiggz: ralt + shift + t :P13:00
UmeaboyAny chance to see a hybris branch of Pie for Sony Xperia X?13:26
Umeaboysonyxperiadev has one, but mer-hybris doesn't.13:26
benclark06where is the detritus package located? i've looked around my local repo and everything but i can't find it anywhere13:32
benclark06i've built everything except the rootfs13:32
Umeaboybenclark06: git --git-dir=$ANDROID_ROOT/hybris/mw/libhybris status13:35
benclark06fatal: Not a git repository: '/home/ben/hadk/hybris/mw/libhybris'13:36
UmeaboyThen you haven't built libhybris.13:36
benclark06oh okay13:37
benclark06i'll do that13:37
T42<elros34> don't listen him, it has nothing to libhybris13:42
T42<elros34> show the changes you made to rpm/droid-hal-$DEVICE.spec13:43
UmeaboyI saw a discussion about it in a previous chat session here when I searched for detritus.13:44
T42<elros34> you can't add anything after %include rpm/dhd/ becaue it will be ignored13:45
benclark06@elros34 ah, that makes more sense than my theory13:49
rinigusUmeaboy, re pie for Xperia X: good idea would be to add one and see if it can be built using xperia 10 instructions and similar repos. just mal mentioned something regarding vendor partition when I asked about possibility to have xz2/xz3 family ported. don't know if xperia x has some older layout13:51
Umeaboyrinigus: I'm currently building for it.13:51
rinigusUmeaboy: what's "it"13:52
UmeaboyXperia X.13:52
rinigusUmeaboy: good luck!13:52
UmeaboyThanks. I built (with a lot of help of course) Sailfish for Sony Xperia 10 about 2 days ago. :)13:53
UmeaboyHaven't flashed it yet though.13:53
rinigusUmeaboy: let us know how is it to use it in practice when you do. like fitting into pockets and using keyboard in landscape :) ... and performance13:55
riniguskimmoli: any luck with testing?14:00
riniguskimmoli: for me the last 24h was all fine14:00
benclark06btw @elros34 thanks for the help, mic's running great now :)14:07
Mister_MagisterNo provider of 'mesa-llvmpipe' found. cannot remove mesa to get libhybris tf14:19
rinigusMister_Magister: is it something like `sb2 -t $VENDOR-$DEVICE-$PORT_ARCH -m sdk-install -R zypper in libhybris-libEGL -mesa-llvmpipe-libEGL` what you look for?14:24
Mister_Magisterhmmm maybe14:24
rinigusMister_Magister: was needed for latest onyx updates14:24
kimmolirinigus: mostly carryed it with me idling. but update was smooth, one reboot ok.14:29
riniguskimmoli: try to shutdown it and put on charger. then boot again and see if all goes fine.14:30
kimmolibefore update it was stuck in act dead, i.e. it did not recognize removing usb14:31
Mister_Magisterrinigus: i ran it second time and it worked lel14:31
riniguskimmoli: will have to check that on new sfos version, I think it was ok14:34
rinigus... but will check again14:34
Mister_Magisterofono-devel >= 1.21+git57 is needed by ofono-ril-binder-plugin-1.0.10-1.armv7hl any halp?14:37
Mister_Magisterrevert it to some previous version?14:37
Mister_Magister1.0.8 did the job14:44
benclark06Failed to mount an un-encryptable or wiped partition on/dev/block/bootdevice/by-name/system at /system options: barrier=1 error: Device or resource busy14:58
benclark06is this bad?14:58
benclark06oh and also droid-hal-init starts :)14:58
T42<elros34> it shouldn't try to mount anything by-name unless you have wrong fixup-mountpoints, check mount units in /lib/systemd/system/*.mount15:07
benclark06pretty sure i screwed up fixup-mountpoints15:08
benclark06that's the bit i always have trouble with lol15:09
Umeaboyrinigus: If you by it refer to Sony Xperia 10 I'll do that. :)15:37 isn't responding to my curl command to get the trusty rootfs.15:45
Umeaboycurl: (6) Could not resolve host: releases.sailfishos.org15:45
rinigusUmeaboy : yes, to that15:47
UmeaboyAnyway to get it anyway?15:58
UmeaboyI get a 404 when I visit that adress in Firefox.16:06
UmeaboySo it does resolve, but the file or page doesn't seem to exist.16:06
benclark06I've updated my fixup-mountpoints but i'm still getting Failed to mount an un-encryptable or wiped partition on/dev/block/bootdevice/by-name/system at /system options: barrier=1 error: Device or resource busy16:37
benclark06here's ls /lib/systemd/system/*.mount16:37
kimmolirinigus: it notices usb disconnect, but stays here forevö
kimmolirinigus: need to press powerkey for a moment (the shortest long press) the it boots to full os18:40
riniguskimmoli: strange, not for me. Let me test again18:41
kimmoliit was fully charged, white led breathing18:42
kimmolion both times18:42
riniguskimmoli: maybe it's different on full charge. Without it, it seems to be fine. Just tested18:43
kimmolidoes it shutdown or reboot when disconnecting cable?18:44
kimmolingh.. wonders is there some mce option for that18:45
kimmolispiiroin: ^ act-dead exit issue...18:46
riniguskimmoli: in our case it could be also generic shutdown issue. After update, I had some problems with shutting down. Not anymore though....18:55
benclark06 can someone check my fixup-mountpoints for any errors?21:15
T42<ArixElo> benclark06: for me looks good21:17
benclark06i thought so too, but sailfish keeps complaining that it's busy21:18
benclark06it keeps doing Failed to mount an un-encryptable or wiped partition on/dev/block/bootdevice/by-name/system at /system options: barrier=1 error: Device or resource busy21:19
T42<elros34> how about  cat /lib/systemd/system/system.mount?21:22
T42<elros34> looks good but your fixup looks wrong: they contains "/dev/". Anyway provide full journalctl21:25
benclark06ah ok, i've fixed that21:26
benclark06and here's journal21:26
benclark06and also just errors21:27
T42<elros34> You didn't disable selinux via bootparam21:28
benclark06is that different from config_audit?21:29
T42<elros34> Did you disable AUDIT?21:29
benclark06one sec21:29
T42<elros34> you shouldn't. Instead disable selinux via bootparam21:30
benclark06ahh ok21:30
benclark06so should i remove audit or enable it?21:31
T42<elros34> CONFIG_AUDIT must be enabled.
benclark06ok, and i add audit=0 selinux=0 to the kernel cmdline right?21:32
T42<elros34> yes, audit=0 might be not needed21:34
benclark06how do i add stuff to the cmdline again?21:34
T42<elros34> somewhere in your device repo or by CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=021:36
benclark06oh yeah its a .mk file right?21:37
T42<elros34> yes, also add symlinks like explained in faq
benclark06there's no usr directory in sparse for me21:39
benclark06is var the same thing?21:39
benclark06nevermind it's not the same thing21:40
benclark06is BOARD_KERNEL_CMDLINE is the kernel command line?22:03

Generated by 2.17.1 by Marius Gedminas - find it at!