*** birdzhang1 is now known as birdzhang | 02:31 | |
Mister_Magister | hey mal can i ruin your day again? :D | 07:56 |
---|---|---|
Mister_Magister | currently other than broken minisf, browser on 16.0 is flashing black and white | 07:56 |
Mister_Magister | hecc i didn't rebuild libhybris, brb | 07:57 |
Mister_Magister | yay i got browser | 08:11 |
T42 | <RealDanct12> Does anyone know why the other sim card lost all bar with mobile data on? | 08:55 |
T42 | <RealDanct12> Here is the ril_subscription.conf I use: | 08:59 |
r0kk3rz | depends on the device, some devices cant use both sim cards simultaneously | 08:59 |
T42 | <RealDanct12> Hmm, this is a Redmi Note 7, a device from 2019 | 09:01 |
T42 | <RealDanct12> So I don't think that's the case | 09:01 |
r0kk3rz | why? | 09:01 |
T42 | <RealDanct12> Since you should be able to receive calls just fine, and it also works fine under Android | 09:02 |
r0kk3rz | reciving calls is different from mobile data | 09:02 |
r0kk3rz | disable a sim and check the other works properly | 09:04 |
Mister_Magister | for whatever reason my droidmedia rpm has Version: 0.20200424.0 which is okay but it builds droidmedia-0.8.0+master.20200615102540.e2da405-1.armv7hl.rpm like what the fuck | 10:33 |
Mister_Magister | someone help :< | 10:40 |
Mister_Magister | https://paste.opensuse.org/8873367 | 10:40 |
mal | Mister_Magister: do you have some local changes in there? | 10:44 |
Mister_Magister | in droidmedia? no | 10:45 |
mal | verify the git diff and git status there | 10:45 |
Mister_Magister | in external/droidmedia? | 10:45 |
Mister_Magister | https://paste.opensuse.org/94156647 | 10:46 |
Mister_Magister | it's totally unedited | 10:54 |
Mister_Magister | also mal https://paste.opensuse.org/83087541 | 11:05 |
T42 | <edp_17> Hi all. Just like last time can somebody advise me why the rild is continuously crashing, please? Is it a config issue somewhere in SFOS or there is something missing on the Android side? monich? It probably will take only a few minutes for you. π | 11:18 |
T42 | <edp_17> Logs: logcat -b radio: https://paste.ubuntu.com/p/3wMVHnqPN5/ | 11:18 |
T42 | <edp_17> full journal: https://paste.ubuntu.com/p/cNWrC8MVvJ/ | 11:18 |
T42 | <edp_17> Thank you. | 11:18 |
mal | Mister_Magister: maybe try removing the droidmedia stuff from hybris/mw/ where it stores the local packaging related things | 11:56 |
Mister_Magister | but not sure how to build it if i move it | 11:57 |
Mister_Magister | mal: btw what packages libminisf? dhd? | 12:01 |
mal | Mister_Magister: droidmedia | 12:04 |
mal | Mister_Magister: not sure what you meant by "not sure how to build it if i move it" | 12:06 |
mal | Mister_Magister: I didn't say anything about moving anything | 12:06 |
Mister_Magister | mal: then that's weird cause it tells me libminisf is corrupted (even tho it's working( | 12:06 |
Mister_Magister | ah removing | 12:07 |
Mister_Magister | ye i removed it and it didn't help | 12:07 |
Mister_Magister | https://paste.opensuse.org/44155996 | 12:08 |
mal | is your dhd submodule new? | 12:09 |
mal | *new enough | 12:09 |
Mister_Magister | i just got latest changes, didn't help | 12:17 |
mal | no idea why it fails for you | 12:18 |
Mister_Magister | same for whatever reason it changes version | 12:19 |
Mister_Magister | for some random one | 12:19 |
mal | does the commit hash in the version it tries to use match one in droidmedia repo or somewhere | 12:20 |
Mister_Magister | droidmedia version returns 0.20200424.0 | 12:23 |
mal | I meant droidmedia-0.8.0+master.20200615120819.a5d73ec.tgz | 12:24 |
mal | the last part is git revision | 12:24 |
mal | I'm just trying to see where it gets that | 12:25 |
Mister_Magister | me too but idk what to check for it | 12:28 |
Mister_Magister | oh build dir has .git which has 0.8.0 | 12:31 |
Mister_Magister | aye fixed | 12:32 |
Mister_Magister | it's weird tho that it switches version | 12:33 |
Mister_Magister | right? btw i was lucky audio and wifi are working ootb | 12:33 |
Mister_Magister | and also after fixing permissions no longer hwc issue | 12:33 |
Mister_Magister | mal: so that issue fixed. on my g2 phones i have "waiting for service surfaceflinger" so like minisf isn't working but it is working | 12:34 |
Mister_Magister | ayy videos are working, gotta fix sensors | 12:40 |
Mister_Magister | https://paste.opensuse.org/96580279 oy not good | 12:41 |
mal | Mister_Magister: gstdroidcamsrc-0.conf are obsolete, not needed anymore | 12:45 |
Mister_Magister | oh what's needed then | 12:45 |
mal | just the camera dconf stuff | 12:45 |
mal | from droid-camres | 12:46 |
mal | or if you want to create it manually | 12:46 |
Mister_Magister | um mal⦠https://paste.opensuse.org/79927922 lemme guess, udev rules symlinks | 12:47 |
mal | are the droidmedia things running correctly? | 12:47 |
Mister_Magister | there is no miniaf, is audioflinger-glue needed for camera? | 12:48 |
Mister_Magister | hecc libminiaf is now running but still camres doesn't work | 13:05 |
Mister_Magister | strace my love where are you | 13:07 |
Mister_Magister | hmm there is no /dev/v4l2 | 13:08 |
Mister_Magister | but that shouldn't be an issue | 13:09 |
Mister_Magister | no such element factory "droidcamsrc" hecc | 13:12 |
Mister_Magister | https://paste.opensuse.org/34300573 no srsly smth broken with that lib | 13:20 |
Mister_Magister | hecc can't find bluebinder in repos | 13:34 |
Mister_Magister | oh it's in local repos | 13:36 |
Mister_Magister | hmm bluebinder doesn't work | 13:39 |
Mister_Magister | if bluebinder is "ot available on all Android 8.1+ devices especially if device was originally using older Android base" then what am i supposed to do | 13:41 |
Mister_Magister | https://paste.opensuse.org/47911297 | 13:43 |
Mister_Magister | so it was rfkill blocked and i unblocked it but still no luck WARNING: Unknown local object 0x109b470 | 13:50 |
Mister_Magister | https://paste.opensuse.org/23822036 | 13:50 |
* Mister_Magister is spamming in hope of someone helping him | 13:51 | |
Mister_Magister | i flashed fresh build and camera's workign | 15:04 |
Mister_Magister | verynice | 15:04 |
T42 | <edp_17> I know it didn't make any difference regarding the problem with RILD but have commented out the 'TvoutService' as @elros34 suggested earlier. | 15:15 |
T42 | <edp_17> Fresh logs are here: | 15:15 |
T42 | <edp_17> journalctl: https://paste.ubuntu.com/p/qYztBSWcSP/ | 15:15 |
T42 | <edp_17> logcat: https://paste.ubuntu.com/p/r6qgps9x3G/ | 15:15 |
T42 | <edp_17> If somebody can take a look and advise where to investigate further, I appreciate it very much. Thanks. | 15:15 |
Mister_Magister | so camera is working i can make pics but droid-camres fails https://paste.opensuse.org/30015842 | 15:22 |
Mister_Magister | abranson: ping can u help me with above? | 15:34 |
abranson | Mister_Magister: doesn't look like droid-camres is working with the new buffer pool handling. doesn't work on devel either. | 15:57 |
Mister_Magister | abranson: so that's not my fault? | 15:58 |
abranson | i get the same error as you | 15:58 |
Mister_Magister | oh but i wanna have config for camera as camera and even recording works :< | 15:58 |
abranson | does piggz camera manage to query resolutions? | 15:59 |
Mister_Magister | abranson: yeah | 16:02 |
Mister_Magister | abranson: can we do smth bout that? | 16:07 |
T42 | <adampigg> use the one-true-camera-app :D | 16:11 |
T42 | <adampigg> i had a big report the other day saying video recording bitrate was too low, ill have to add options | 16:11 |
Mister_Magister | @adampigg well viewfinder doesn't work so i can't really | 16:11 |
abranson | i wonder if it doesn't work with fakesink anymore | 16:14 |
Mister_Magister | abranson: wdym | 16:18 |
abranson | nope, doesn't work without it either | 16:18 |
Mister_Magister | hmm fxtec is newer and it's working fine there :< | 16:18 |
T42 | <hacker12455> @elros34 [4.x? Do you mean cm11?], yes | 17:11 |
T42 | <elros34> @hacker12455 I still use cm11 with 3.3.0.x but i guess nobody else. I can't remember any difference to 12 or 13 base. There is issue with latest libhybris but only for obs build so local or older release works fine | 17:19 |
T42 | <Anton %lastname%> My device is nearly perfectly usable. Thanks to all who's replied. I'm deeply grateful. There's a weird quirk at droid-hal-init, which prevents from using camera, and most likely sensors, although even with my hack the autorotate doesn't work and I have no idea how to test them. Here's how it goes: it spams dmesg with "msm_ip | 17:26 |
T42 | c_router_bind: sensors.qti Do not have permissions", but if I launch /vendor/bin/sensors.qti as root and exit, or leave it be, it will happily proceed and stop spamming. I can't see it accessing any files in strace, droid-hal-init will launch it fine after my intervention. Any ideas? | 17:26 |
T42 | <hacker12455> hm is there a minimal amount of RAM for Sailfish? | 17:29 |
T42 | <Anton %lastname%> I believe it has been ported to 1gb devices, 512, not so sure | 17:30 |
Mister_Magister | who can i ask about bluetooth :< | 17:33 |
T42 | <Anton %lastname%> Hit us | 17:35 |
T42 | <Anton %lastname%> Somebody will eventually see it | 17:35 |
Mister_Magister | i know i know | 17:45 |
Mister_Magister | thing is i asked already | 17:45 |
T42 | <Anton %lastname%> Mister_Magister, if you use bluebinder, I suppose your base is 8 or higher. We'd like to see logcat and your kernel config, specifically you'd have to have BT_HCIVHCI=y, otherwise android side is the issue | 17:52 |
Mister_Magister | ofc i added it lol | 17:52 |
Mister_Magister | ay don't treat me like a noob plz i'm 5 years in this crap already thankyouverymuch | 17:53 |
T42 | <Anton %lastname%> logcat then? | 17:54 |
Mister_Magister | can do | 17:55 |
Mister_Magister | https://paste.opensuse.org/56593554 | 17:56 |
Mister_Magister | tis is from restarting bluebinder | 17:56 |
Mister_Magister | @hacker12455 1GB is absolute minimum | 17:59 |
Mister_Magister | not that it won't boot on 512MB (cause i did so) but ye 1GB is nice to use | 18:00 |
* Mister_Magister ahh booting sfos on 600MHz and those timing issues <3 | 18:01 | |
T42 | <Anton %lastname%> Mister_Magister: your problem is this: Diag_Lib: Diag_LSM_Init: Failed to open handle to diag driver, error = 13. My guess is it's either some kernel config issue, or your permissions to /dev/diag are broken. Could you show us latter? | 18:14 |
Mister_Magister | aye captain | 18:15 |
Mister_Magister | crw-rw---- 1 system root 239, 0 Jun 15 18:40 /dev/diag | 18:15 |
Mister_Magister | let's 777 it | 18:15 |
Mister_Magister | nope didn't help | 18:16 |
T42 | <Anton %lastname%> Mine's the same, so perhaps your kernel config is somehow broken? Really doubt that, especially after you're a pro at this and I'm just a month in | 18:18 |
Mister_Magister | ye like shit i added flag and everything | 18:19 |
Mister_Magister | not saying im pro. just not that of a noob | 18:19 |
T42 | <Anton %lastname%> I hope you're using menuconfig though | 18:19 |
Mister_Magister | noone here taught me how so nope | 18:20 |
Mister_Magister | zcat /proc/config.gz |grep BT_HCIVHCI CONFIG_BT_HCIVHCI=y | 18:20 |
T42 | <Anton %lastname%> Wowie | 18:20 |
Mister_Magister | is it enough proof? | 18:20 |
T42 | <Anton %lastname%> That might be fine, but using menuconfig will eliminate any unresolved dependencies in kernel | 18:21 |
T42 | <Anton %lastname%> So, perhaps that is enabled, but something that's also enabled needs something that's not? | 18:21 |
Mister_Magister | faq tells only aobut this flag | 18:22 |
kimmoli | no one is using menuconfig afaik | 18:24 |
Mister_Magister | ye | 18:24 |
Mister_Magister | see | 18:24 |
T42 | <elros34> it's not really hard to use menuconfig or even xconfig , you just have copy over .config/defconfig | 18:25 |
T42 | <edp_17> Is it possible to use menuconfig? It would be beneficial as eliminates dependency issues. | 18:25 |
T42 | <edp_17> Oh, you just responded. | 18:25 |
T42 | <Anton %lastname%> Just go into kernel directory and run ARCH=arm64 make menuconfig, then load your defconfig using relative paths | 18:26 |
T42 | <Anton %lastname%> Mine's arch/arm64/configs/river_defconfig | 18:26 |
T42 | <Anton %lastname%> Your's might be similar | 18:27 |
Mister_Magister | how to load | 18:28 |
T42 | <Anton %lastname%> using buhttonz | 18:28 |
T42 | <Anton %lastname%> After you arrive in menuconfig, select load using arrows and press enter. Left/right is action and up/down is select option | 18:29 |
T42 | <Anton %lastname%> load, save and exit will not care about option | 18:30 |
Mister_Magister | ahhh i c | 18:31 |
T42 | <Anton %lastname%> Turns out installing gentoo could be beneficial in life, now I know how to config kernel | 18:32 |
T42 | <elros34> I suggest xconfig. Depends on kernel version it might work in host or in ubuntu chroot atfter installing dependecies | 18:34 |
Mister_Magister | it removed bunch of shit | 18:34 |
Mister_Magister | u sure it's safe? | 18:36 |
T42 | <elros34> same things are removed when you run make hybris-boot and .config is generated | 18:37 |
Mister_Magister | and it didn't change anything about bluetooth | 18:37 |
Mister_Magister | i mean i can boot it but doubt there will be change | 18:39 |
T42 | <elros34> obviously there will be no change, starting menuconfig doesn't automaticaly fix anything | 18:42 |
T42 | <edp_17> Only problems of missing dependecies.π | 18:44 |
Mister_Magister | @elros34 thats what i'm talking about | 18:44 |
Mister_Magister | meanwhile i fixed dt2w | 18:44 |
T42 | <edp_17> dt2w? What's that? | 18:45 |
Mister_Magister | doubletap 2 wake | 18:45 |
T42 | <edp_17> Thanks. | 18:46 |
T42 | <edp_17> I thought that works automatically if you install mcetools and set it up. | 18:46 |
kimmoli | it requires that the device (and kernel driver for touch) supports it, and sends correct events | 18:48 |
T42 | <edp_17> I see, thanks. Perhaps I got lucky with my ports. | 18:48 |
Mister_Magister | @edp_17 key was different | 18:49 |
Mister_Magister | was KEY_WAKEUP that i had to map to KEY_POWER | 18:49 |
kimmoli | onyx had some extra, like flashlight and mpris, so wrote a daemon to handle those | 18:50 |
T42 | <Anton %lastname%> While everyone's awake, could someone please see my problem? I'm just a little higher | 18:50 |
Mister_Magister | as everyone guessed menuconfig didn't help | 18:52 |
Mister_Magister | also guys pics in gallery are black but browser works fine, ideas/ | 19:00 |
Mister_Magister | ah yes QT_OPENGL_NO_BGRA=1 | 19:04 |
Mister_Magister | thanks me from 4 years ago for help | 19:06 |
Mister_Magister | well 2 years* | 19:06 |
T42 | <edp_17> Mister_Magister: Do you have any ideas why video recording doesn't work while it is ok on the android base? | 19:36 |
Mister_Magister | depends on logs really | 19:36 |
T42 | <edp_17> What logs? logcat and journalctl or any other camera specific? | 19:39 |
T42 | <edp_17> I'll get them but later because it's bedtime for my children. π | 19:39 |
T42 | <Anton %lastname%> I've found something suspicious about my sensors problem. test_sensors fails with "Assertion `hwmod != NULL' failed", as it can't find any libs it wants. I've heard that with some devices those libs can exist in lib64, but not in lib. That's not my case, they're absent in both. Rather weird | 19:42 |
Mister_Magister | abranson: btw if you get something with that problem please please ping me (best pm cause it will be saved) | 21:11 |
T42 | <ankaos> how install my package obs? | 22:00 |
T42 | <edp_17> Do we need "Deferred initcalls support" (DEFERRED_INITCALLS) in kernel? If yes, why? | 22:25 |
T42 | <edp_17> How can I find out what modem chip (like IMC XMM6262 or IMC XMM6360) is used in a device? | 23:01 |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!