Wednesday, 2022-04-20

voidanix[m]btw Thaodan about A11 on kumano: after that initial GUI we're back to square one06:17
voidanix[m]looks like using /etc/selinux/minimum/policy/policy actually makes the sepolicy NOT load (checked w/ policy version)06:17
voidanix[m]so the issue of selinux not letting journald start and stuff still remains06:18
Thaodanvoidanix[m]: Are you really booting on permissive? I wonder since permisse would ignore  this.11:44
voidanix[m]Thaodan: yes, `SELinux:  Starting in permissive mode`, `cat /sys/fs/selinux/enforce` is 012:31
voidanix[m]also added `enforcing=0` to be extra sure but nothing, used an userdebug precompiled_policy as well and nothing12:31
T42<dani551> Am I mistaken in thinking that the hybris patches detailed in the faq come at a later stage? Anyway, I have applied the patches but the last 2 points in there (hybris-17.1) didnt make sense to me since I am at the stage 5.4 (Building Relevant Bits of your Android base) in the HADK (re @elros34: @dani551 unfortunate...)15:55
T42<dani551> unfortunately TheMuppets have my vendor only for lineage-18.1 and above, but I need the one from 17.1, so I am using this one from whatawurst: ``15:58
T42<dani551> Anyway, I still tried pulling the muppets version and I get this output here:15:58
T42<dani551> `` (re @SailfishFreenodeIRCBridgeBot: <Thaodan>dani551: ht...)15:58
mal@dani551 the hybris patches need to be applied before running make hybris-hal16:12
T42<dani551> I see, well, I have applied them, run `make clean` and still get the same results (re @SailfishFreenodeIRCBridgeBot: <mal>@dani551 the hy...)16:17
malwhat results?16:20
T42<dani551> this one mal (re @dani551: Hey guys, I need som...)16:21
malare you sure you have correct branches checked out of those device repos?16:22
T42<dani551> this is my repo manifest file:16:23
T42<dani551> (re @SailfishFreenodeIRCBridgeBot: <mal>are you sure yo...)16:23
malwhat repo do you have cloned to vendor/samsung/gts4lv-common16:27
T42<dani551> on the vendor for hybris-17.1 : none16:34
T42<dani551> on the vendor for hybris-18.1 : TheMuppets16:34
T42<dani551> I tried both since it was metioned here (re @SailfishFreenodeIRCBridgeBot: <mal>what repo do yo...)16:34
malthen why you get this error on 17.1 if there is nothing there?16:36
T42<dani551> so sorry, that was the output from 18.1, my bad16:37
T42<dani551> here is the output from 17.1:16:37
T42<dani551> (re @SailfishFreenodeIRCBridgeBot: <mal>then why you ge...)16:37
malwhy does that one I linked have "LINEAGE_VERSION=17.1-20220420-UNOFFICIAL-beyond1lte" is it's 18.116:38
T42<dani551> mal, probably because I tried switching just the vendor to 18.1 as suggested here (re @SailfishFreenodeIRCBridgeBot: <Thaodan>dani551: ht...)16:45
mallooks like the vendor repo doesn't have all the needed things16:45
T42<dani551> the 17.1 one? (re @SailfishFreenodeIRCBridgeBot: <mal>looks like the ...)16:46
T42<dani551> the 17.1 repo? (edited) (re @SailfishFreenodeIRCBridgeBot: <mal>looks like the ...)16:46
maljust mentioning that I can't see well what those things you try to reference are, for example 19:45 < T42> <dani551> mal, probably because I tried switching just the vendor to 18.1 as suggested here (re @SailfishFreenodeIRCBridgeBot: <Thaodan>dani551: ht...)16:47
malthat is how I see it in irc16:47
mal@dani551 but the log suggests you didn't completely switch to 18.1 in your attempt16:47
T42<dani551> should I clone TheMuppets 17.1 to `vendor/samsung` (albeit without my device vendor files) and then clone my device vendor files into `vendro/samsung/beyond1lte`16:48
T42<dani551> I switched just the vendor to 18.1, everything else on 17.1 (re @SailfishFreenodeIRCBridgeBot: <mal>@dani551 but th...)16:48
mal that mentions extracting the blobs16:48
T42<dani551> its basically this: ( (re @SailfishFreenodeIRCBridgeBot: <mal>that is how I s...)16:48
malyou probably should only have the vendor repo you have now in manifest and then extract the blobs as mentioned in the link I just gave16:49
T42<dani551> ok, thanks, will try16:50
T42<dani551> I would need the stock A11 or LOS17.1 vendor then for this, right? (re @SailfishFreenodeIRCBridgeBot: <mal>you probably sh...)16:51
T42<dani551> I would need the stock A10 or LOS17.1 vendor then for this, right? (edited) (re @SailfishFreenodeIRCBridgeBot: <mal>you probably sh...)16:52
T42<dani551> *A1016:52
malis there a reason why you don't just try full 18.1? it might have some troubles but should be doable17:05
T42<dani551> I tried 18.1 before, but I could not get it to completely build, although that was some months ago and I was told it was unstable at the time17:07
T42<dani551> is it stable enough now? (re @SailfishFreenodeIRCBridgeBot: <mal>is there a reas...)17:07
malwell it works on some devices, I had issues on one device17:09
T42<dani551> with how bad a road samsung has given us, I wouldnt expect it to be easy17:15
T42<dani551> our attempts with A11 had been troublesome with halium too (re @SailfishFreenodeIRCBridgeBot: <mal>well it works o...)17:15
ThaodanI think the hybris part of 18.1 is stable enough, it depends if there some bugs on a11 on your device17:35
malwell I never figured out any proper way to fix fp3 issues17:42
malthe issue with non-updatable apex17:45
malThaodan: or has there been a fix for that later?17:45
Thaodanmal: I don't know, I'm not aware of anyone fixing that. Could marking it as updatable always fix it?17:46
malhmm, not sure17:47
ThaodanIn any case the update mechanism doesn't work with hybris anyway.17:49
ThaodanRight now I'm stuck fixing the modem on Xperia 1 II17:50
malThaodan: how is the modem broken?18:51
Thaodanmal: It connect to data services and doesn't suspend properly18:54
ThaodanQTI_SDM_INFO: [qti_rmnet_peripheral.c:934] qti_rmnet_ph_send_msg():Couldn't set ph_iface_fd18:55

Generated by 2.17.1 by Marius Gedminas - find it at!