Saturday, 2023-05-13

CarbontatedCaffeineIt's done00:10
CarbontatedCaffeineI'm going to see what happens when I flash it :)00:11
CarbontatedCaffeineIt gives me error installing zip00:22
CarbontatedCaffeineafter unmounting system00:22
CarbontatedCaffeineit says something about fastboot?00:23
mal?00:26
malsome devices have issues with recovery00:26
CarbontatedCaffeineOh I see00:26
CarbontatedCaffeineI'm looking at 9.100:26
CarbontatedCaffeineIs there any docs on doing this manually00:29
CarbontatedCaffeineor can I use the scripts to manually do it00:29
CarbontatedCaffeinehttps://pastebin.com/uhGVAwCg00:39
CarbontatedCaffeineI pulled the log file from the phone00:39
malhave you tried to extract the rootfs manually in telnet=01:03
malit's a bit ugly way but possible for testing, which means that you copy the rootfs tar.bz2 from the zip into sdcard if your device has one, then flash the hybris-boot and then boot and via telnet mount the sdcard and extract the rootfs using certain command01:05
malCarbontatedCaffeine: maybe check chapter 11.1 if that could work on your device01:06
CarbontatedCaffeineJust got back, I'll take a look at both01:07
malthat is simpler than the telnet way but very similar01:07
malbasic idea is the same in both01:07
CarbontatedCaffeineoh no, bunzip2 is not installed01:09
malyeah, then telnet might be easier01:10
CarbontatedCaffeineI think I've used telnet before01:11
CarbontatedCaffeinealright, I'll give it a go01:12
CarbontatedCaffeineI'll flash hybris-boot into boot, right?01:12
malyes01:13
malthen boot and hope you have can use "telnet 192.168.2.15 23" to access the device01:13
CarbontatedCaffeineit bootloops01:14
CarbontatedCaffeinejust like you said01:14
CarbontatedCaffeinemy tree has the commits reverted to fix logs I think01:15
CarbontatedCaffeineit's stuck on the google logo now01:16
malhow soon does it reboot?01:16
CarbontatedCaffeinestraight after01:16
CarbontatedCaffeineit got to the google logo and restarted showing the warning thing saying bootloader unlocked01:17
CarbontatedCaffeineand did it again01:17
CarbontatedCaffeineWOAH01:17
CarbontatedCaffeinemal no way01:18
CarbontatedCaffeineI'm in01:18
maloh01:18
CarbontatedCaffeineafter it stopped bootlooping01:18
malodd01:18
CarbontatedCaffeineWelcome to the Mer/SailfishOS Boat loader debug init system.01:18
CarbontatedCaffeinecorrect?01:18
malyes01:18
CarbontatedCaffeinewhy does it come with VIM01:19
CarbontatedCaffeinerahhh01:19
CarbontatedCaffeineanyway, sorry how should I get the rootfs in there using telnet01:20
maldo you sdcard where you can store it?01:22
CarbontatedCaffeineOh, right01:25
CarbontatedCaffeineyeah uh...01:26
CarbontatedCaffeineit doesn't have an sdcard slot :P01:26
malhmm01:28
CarbontatedCaffeineI wonder, does this mean the reason why the zip wasn't installing was because bunzip wasn't installed01:29
malit's possible01:30
CarbontatedCaffeinecan I push the folder and put it in the place manually01:31
CarbontatedCaffeineall the stuff in it01:31
malI remember someone did some work to change the packaging to tar.gz I think01:31
CarbontatedCaffeineI see01:32
CarbontatedCaffeineI could try orange fox recovery? It has some tweaks on top01:32
CarbontatedCaffeinemaybe it has more stuff in it too01:32
CarbontatedCaffeineincluding bunzip01:32
CarbontatedCaffeineah nevermind01:33
malhttps://piggz.co.uk/sailfishos-porters-archive/index.php?log=2023-04-13.txt#line293 this mentions changing to tar.gz01:33
CarbontatedCaffeineI'm trying it now01:34
CarbontatedCaffeineHopefully it works *crosses fingers*01:35
T42<elros34> you do not need sdcard, you can always put tarball to /data01:36
CarbontatedCaffeineInfo[05/13 01:37:24] : Pack rootfs to /home/camden/hadk/sfe-marlin-4.5.0.18-my1/sfe-marlin-4.5.0.18-my1.tar.gz. Please wait... Info[05/13 01:38:04] : Running pack scripts ... /home/camden/hadk/sfe-marlin-4.5.0.18-my1 /home/camden/hadk No rootfs archive found, exiting ... Info[05/13 01:38:04] : Script returned with non zero status, failing.  Error <creator>[05/13 01:38:05] : Failed to execute %pack script with /bin/bash01:40
CarbontatedCaffeineoh whoops01:41
CarbontatedCaffeineI think I fixed the path01:45
CarbontatedCaffeineokay I have fixed it01:52
CarbontatedCaffeineI'm gonna try the new zip01:52
CarbontatedCaffeineIt didn't pack the tar.gz into the zip01:53
CarbontatedCaffeineOh I do it manually, my bad01:54
CarbontatedCaffeineOk, it's working01:59
CarbontatedCaffeineMoment of truth guys02:00
CarbontatedCaffeineNo GUI I don't think02:00
CarbontatedCaffeineTelnet no longer works02:02
CarbontatedCaffeineGuys, the status notification light is blinking02:03
CarbontatedCaffeineI also noticed when I hold the button down it turns red as well02:05
CarbontatedCaffeineso I think it's working02:05
CarbontatedCaffeineI cannot connect via adb, nor telnet now02:14
T42<elros34> there is no adb in sailfish, create empty /init_enter_debug2  to bring back telnet02:22
CarbontatedCaffeine?02:22
CarbontatedCaffeinewhat does "/init_enter_debug2" mean02:23
T42<elros34> its file02:24
CarbontatedCaffeine?02:25
CarbontatedCaffeineWhere?02:26
T42<elros34> in root of sailfish /02:26
CarbontatedCaffeineoh, ok02:26
CarbontatedCaffeineI just did touch init_enter_debug202:30
CarbontatedCaffeinein /data/.stowaways/sailfishos02:30
CarbontatedCaffeinewell, now it's no longer fully connecting02:37
CarbontatedCaffeineit's stuck at "connecting" in the settings page02:37
T42<elros34> settings page of what?02:39
CarbontatedCaffeinegnome02:39
CarbontatedCaffeineit says ethernet is still connecting02:39
CarbontatedCaffeineIt ends up automatically disconnecting02:39
T42<elros34> use ifconfig instead some vague gui02:40
CarbontatedCaffeinealso, I noticed the status LEDs are no longer blinking02:40
CarbontatedCaffeineI did02:40
CarbontatedCaffeineno ipv402:40
CarbontatedCaffeineenp7s0f4u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         inet6 fe80::f0ea:ec82:507c:faf3  prefixlen 64  scopeid 0x20<link>         ether 3e:9a:db:22:34:e6  txqueuelen 1000  (Ethernet)02:40
T42<elros34> so add it then02:40
CarbontatedCaffeineI'm going to delete the file02:40
CarbontatedCaffeinewym add it?02:40
CarbontatedCaffeineit's not connecting02:41
CarbontatedCaffeineit automatically gives it an ipv4 address02:41
CarbontatedCaffeineonce it's finished02:41
CarbontatedCaffeineAnd it's not finishing02:41
T42<elros34> follow hadk-hot then:  "* If ifconfig shows that inet address is not assigned and you can't telnet" section02:41
CarbontatedCaffeineenp7s0f4u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         ether 3e:9a:db:22:34:e6  txqueuelen 1000  (Ethernet)02:42
CarbontatedCaffeineLook02:42
CarbontatedCaffeinesee02:42
CarbontatedCaffeineit now doesn't even have an address anymore02:42
CarbontatedCaffeineI checked hot but it doesn't solve my answer either02:42
T42<elros34> that explains everything... what did you try? Did you follow halium instruction for setting up telnet02:43
T42<elros34> ?02:43
CarbontatedCaffeineno?02:43
CarbontatedCaffeinestill doesn't work02:45
CarbontatedCaffeine3 Mer Debug telnet on port 2323 on rndis0 192.168.2.15 - also running udhcpd 1 0000:07:00.4 1 0000:07:00.3 1 0000:07:00.4 7 00000000002:45
T42<elros34> you are not really giving any details, show ifconfig output02:46
CarbontatedCaffeinesure02:47
CarbontatedCaffeineWait, I just did?02:47
CarbontatedCaffeineenp7s0f4u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         inet6 fe80::f0ea:ec82:507c:faf3  prefixlen 64  scopeid 0x20<link>         ether 3e:9a:db:22:34:e6  txqueuelen 1000  (Ethernet)         RX packets 0  bytes 0 (0.0 B)         RX errors 0  dropped 0  overruns 0  frame 0         TX packets 45  bytes 9518 (9.2 KiB)         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 002:47
T42<elros34> so did you run these ip address/route command or not02:48
CarbontatedCaffeineYes02:49
CarbontatedCaffeinePING 192.168.2.15 (192.168.2.15) 56(84) bytes of data.  --- 192.168.2.15 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1011ms02:49
CarbontatedCaffeineI'm deleting that file02:50
T42<elros34> then you probably run them incorrectly02:51
CarbontatedCaffeine???02:52
CarbontatedCaffeineI'm not?02:52
CarbontatedCaffeineI swear I'm not02:52
CarbontatedCaffeineYou gotta believe me02:52
CarbontatedCaffeineIt's literally disconnecting itself02:52
CarbontatedCaffeineit fails to connect to the computer02:52
CarbontatedCaffeineGnome comes up with a grayed out box after a while signifying that it's no longer attempting to connect02:53
CarbontatedCaffeineI remove the file, still not working.02:55
CarbontatedCaffeineWAIT02:55
CarbontatedCaffeinenow it is02:55
CarbontatedCaffeineI told you, it was that file I made02:56
CarbontatedCaffeineyou told me to make02:56
CarbontatedCaffeineiSerial                 3 HT6910207160   iSerial                 1 0000:07:00.4   iSerial                 1 0000:07:00.302:58
CarbontatedCaffeineI did the instructions again03:00
CarbontatedCaffeinecarefully03:00
CarbontatedCaffeinestill nothing03:00
CarbontatedCaffeineAm I looking for "init.usb.rc"03:05
CarbontatedCaffeineSo making the file manually seems to mess it up03:10
CarbontatedCaffeinehttps://pastebin.com/V2KWwD8303:15
CarbontatedCaffeineheres the log03:15
CarbontatedCaffeineWowwww03:21
CarbontatedCaffeineit changed port03:21
CarbontatedCaffeineto 232303:21
CarbontatedCaffeinetelnet 192.168.2.15 2323 did it03:21
CarbontatedCaffeinethanks logs!03:21
CarbontatedCaffeineI'm trying to get GUI to work, and I'm not sure which logs to check03:54
*** Danct12 is now known as Guest2404:04
T42<edp_17> Most of the time journal and logcat show the problem.05:30
*** Danct12 is now known as Guest3005:32
CarbontatedCaffeine> Most of the time journal and logcat show the problem.05:41
CarbontatedCaffeineTime to take a look then05:41
CarbontatedCaffeineI did check journal before05:41
CarbontatedCaffeineI didn't see what was wrong at first glace05:41
CarbontatedCaffeine*glance05:42
CarbontatedCaffeineI have the log05:47
CarbontatedCaffeinehttps://pastebin.com/rs76nBRS05:48
CarbontatedCaffeineIt's very long though05:48
CarbontatedCaffeineIt seems to be pulseaudio related?06:01
CarbontatedCaffeineI'll have to follow the faq I think?06:01
T42<adampigg> i wonder if changing CONFIG_LTO_CLANG_FULL to n changed the module layout09:45
T42<CristianSW_JV> Hi all, could you give me some links to documentation about porting to new device, or some examples form which part to start, as google pixel 3a and 3a xl have aosp I think that porting sailfish to them should not be very hard to do, now I am using UT on pixel, but want to have possibility to use sailfish too, and I am interested to learn how to port devices, that would be great experience for me and I hope good contribution to communit10:04
T42<elros34> so have you tired pinging maintainer of sargo?10:06
T42<CristianSW_JV> not yet, but looked at their github profile and maintainer its working on droidian, planned to contact him today or tomorow after my main work (re @elros34: so have you tired pi...)10:08
T42<elros34> ok its up to you. Docs are: https://docs.sailfishos.org/Develop/HADK/, https://etherpad.wikimedia.org/p/hadk-hot, https://github.com/mer-hybris/hadk-faq. Then at least one example device from https://github.com/mer-hybris based on android base you plan to use. Mind that jolla uses aosp but most community ports base on lineage10:17
T42<CristianSW_JV> đź‘Ť (re @elros34: ok its up to you. Do...)10:21
CarbontatedCaffeineI've managed to break my development environment again10:39
CarbontatedCaffeineNow google-marlin-aarch64 doesn't exist anymore for the target10:40
CarbontatedCaffeineI really don't want to have to restart all over again, cause there's so much to keep track of now10:41
CarbontatedCaffeinewhy does it not exist anymore!??10:43
T42<elros34> wait I will take out my crystall ball in a minute10:45
T42<elros34> Be serious, explain what you did, show sdk-assistand list output..10:46
CarbontatedCaffeine[camden@fedora hadk]$ sdk-assistant list SailfishOS-latest └─SailfishOS-latest-aarch64 [camden@fedora hadk]$10:47
CarbontatedCaffeineIt's literally gone10:47
CarbontatedCaffeineand it refuses to make a new one10:47
CarbontatedCaffeinehttps://pastebin.com/s9YSFDsj10:48
CarbontatedCaffeineThis does something very weird10:49
T42<elros34> are you even in sdk? Again, what steps did you make?10:50
CarbontatedCaffeinehttps://pastebin.com/ueXBMnWF10:51
CarbontatedCaffeineWhy is it randomly using grep10:51
CarbontatedCaffeineI'm in SDK10:51
CarbontatedCaffeine> Again, what steps did you make?10:51
CarbontatedCaffeineUhhh10:51
CarbontatedCaffeineI think I accidentally typed in10:51
CarbontatedCaffeinerpm/dhd/helpers/add_new_device.sh10:51
CarbontatedCaffeineand it broke everything10:51
CarbontatedCaffeinebut beforehand I was trying to do repo sync10:52
CarbontatedCaffeinebut it said10:52
CarbontatedCaffeinefatal: duplicate path hybris/hybris-boot in /home/camden/hadk/.repo/manifest.xml10:53
CarbontatedCaffeineAnd I can't10:53
CarbontatedCaffeineI have to re-start it again10:53
T42<elros34> repo sync to accidentally remove all your work? I see no point doing it again. Clearly you installed something in sdk, try installing gnu-grep if not reinstall platform sdk is not much work10:54
CarbontatedCaffeineI think I'm gonna start from scratch again, I can't keep track of what's happening10:55
T42<elros34> good luck then10:56
CarbontatedCaffeineI have this problem, if something is even a tiny bit wrong it frustrates me10:56
CarbontatedCaffeineand I have to restart10:56
CarbontatedCaffeinecause like, my workspace is really messy at this point10:57
CarbontatedCaffeineI don't know what is what10:57
CarbontatedCaffeineand I have trouble finding the files I need in hybris and rpm10:57
CarbontatedCaffeineI feel like I'm missing files too?10:59
CarbontatedCaffeineI just want something to go right for freaking once11:03
CarbontatedCaffeineTHIS STUPID GREP THING11:08
CarbontatedCaffeinewhenever I login now11:08
CarbontatedCaffeinegrep: unrecognized option '--file'11:09
CarbontatedCaffeinewhy11:09
CarbontatedCaffeinethis is making me go insane11:09
CarbontatedCaffeinegenuinely11:09
CarbontatedCaffeine_Hey guys, just wanted to apologize for the mental breakdown in chat (whoops), gonna take a weeks break and come back.11:27
T42<edp_17> An advise, if you push your stuff to you own github repo, it helps and makes easier to restart from scratch anytime. Also, making notes of faced problems and how to fix them, helps A LOT in the future.17:25

Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!