| T42 | <damnbruh2004> i set boot image header version to 0 explicitly and it worked. it reports randisk size != 0, so we can assume it is packaged? full output https://pastebin.com/QTzHFigw | 00:03 |
|---|---|---|
| T42 | <damnbruh2004> oh, apparently telnet is provided by device, i just needed to run lsusb -v as root. that being said i can't connect to it and steps from the halium docs don't apply. perhaps this is because i am using wsl + usbipd | 00:56 |
| T42 | <damnbruh2004> halium docs are at https://docs.halium.org/en/latest/porting/debug-build/early-init.html | 00:56 |
| *** n2klb_ is now known as n2klb | 02:37 | |
| T42 | <damnbruh2004> apparently you need to compile and enable a separate module for usb networking to work with wsl + usbipd-win. you can follow the steps as described in this post, except for the sed-based patch line, it's not needed | 05:04 |
| T42 | <damnbruh2004> https://forum.sailfishos.org/t/jolla-phone-2026-windows-11-has-anyone-successfully-used-usb-developer-mode-rndis/30616/6 | 05:04 |
| T42 | <damnbruh2004> managed to get telnet and examined the logs. it fails to mount userdata and the partition layout is different from what i have set in the fixup-mountpoints. i can mount the directory manually (though the device path is different from both fixup-mountpoints and what the init script is using) | 06:27 |
| T42 | <damnbruh2004> error is as follows | 06:27 |
| T42 | <damnbruh2004> mount: mounting /dev/block/bootdevice/by-name/userdata on /data failed: No such file or directory | 06:27 |
| T42 | <damnbruh2004> full log https://pastebin.com/dvJUi2tq | 06:27 |
| T42 | <damnbruh2004> any tips would be appreciated, thanks | 06:27 |
| T42 | <damnbruh2004> fixup-mountpoints source https://github.com/fortuna-for-smoothie/hybris-boot/blob/hybris-18.1/fixup-mountpoints#L1183 | 06:28 |
| T42 | <the_hiktor> Which device was that ? (re @damnbruh2004: fixup-mountpoints so...) | 07:32 |
| T42 | <damnbruh2004> @the_hiktor fortuna3g is galaxy grand prime xxu | 07:34 |
| T42 | <the_hiktor> You sure about the mount points ? (re @damnbruh2004: @the_hiktor fortuna3...) | 07:36 |
| T42 | <the_hiktor> Besides does it use dynamic partitions ? | 07:36 |
| T42 | <damnbruh2004> Not really. I will boot into android later today and confirm. It does not use dynamic paetitons (you mean a/b boot, right?) | 07:37 |
| T42 | <damnbruh2004> For the mountpoints it had two categories with different names when i checked in android. Ao maube i should've used the other one | 07:38 |
| T42 | <the_hiktor> Could be without a/b scheme too (re @damnbruh2004: Not really. I will b...) | 07:38 |
| T42 | <the_hiktor> Check fstab (re @damnbruh2004: For the mountpoints ...) | 07:38 |
| T42 | <damnbruh2004> Yeah, it had recovery fstab and basic fstab in android. I took info from the basic one | 07:39 |
| T42 | <damnbruh2004> @the_hiktor google says dynamic partitons were introduced in android 10. The device is from 2015, so probably no. Even rhough I am building on top of custom lineage 18.1 android 11 | 07:42 |
| T42 | <the_hiktor> Ik but i remember some people crazy enough to bring such thing to old devices (re @damnbruh2004: @the_hiktor google s...) | 07:43 |
| T42 | <the_hiktor> Show me your fstab | 08:01 |
| T42 | <damnbruh2004> @the_hiktor the fstab looks like this https://pastebin.com/s5kzTBeK | 08:11 |
| T42 | <elros34> so your fixup-mountpoints doesn't match it | 08:21 |
| T42 | <damnbruh2004> as per hadk handbook i did `ls -l /dev/block/platform/*/by-name/` and used the output | 08:32 |
| T42 | <elros34> that is wrong. read hadk-hot or just use by-name path from your fstab | 08:33 |
| T42 | <elros34> block/bootdevice/by-name | 08:33 |
| T42 | <damnbruh2004> srry for not referring to hot again. I was setting up the kernel part before i discovered it | 09:52 |
| T42 | <damnbruh2004> I edited the fixup script but the log is identical | 09:53 |
| T42 | <damnbruh2004> You can find it here https://github.com/fortuna-for-smoothie/hybris-boot/blob/d329c541912542285da7299c439053ae7038783b/fixup-mountpoints#L1183 | 09:53 |
| T42 | <damnbruh2004> just in case i misunderstood the writing | 09:55 |
| T42 | <damnbruh2004> fstab.qcom https://pastebin.com/s5kzTBeK | 09:55 |
| T42 | <damnbruh2004> ls devices https://pastebin.com/NKYzZpLe | 09:55 |
| T42 | <elros34> did you run make hybris-hal and fash hybris-boot.img after making changes? | 09:58 |
| T42 | <damnbruh2004> also diagnosis.log file reports CONFIG_AUTOFS4_FS option missing in kernel, even though i've enabled it | 09:58 |
| T42 | <damnbruh2004> https://github.com/fortuna-for-smoothie/android_kernel_samsung_msm8916/blob/d0367ab6d2b60ce937d5c513536a5d9e446d99f4/arch/arm/configs/msm8916_sec_defconfig#L96 | 09:58 |
| T42 | <damnbruh2004> @elros34 i built hybris-hal and droidmedia, then packaged the full zip and flashed on top of lineage, since i was testing the layout in it | 09:59 |
| T42 | <elros34> just flash now hybris-boot.img | 09:59 |
| T42 | <damnbruh2004> may this error be due to no files .rc in /root after building droid-hal? we circumvent this by creating a dummy rc | 10:00 |
| T42 | <elros34> not related at all | 10:02 |
| T42 | <damnbruh2004> okay. after flashing hybris-boot into the kernel it bootloops. let me see the kmsg | 10:03 |
| T42 | <elros34> touch /data/.stowaways/sailfishos/init_enter_debug2 | 10:04 |
| *** deathmist1 is now known as deathmist | 10:06 | |
| T42 | <damnbruh2004> nope, still bootloops without establishing connection with my pc | 10:06 |
| T42 | <damnbruh2004> gotta go now. will return to ya'll later | 10:07 |
| T42 | <elros34> you must have done something else also. First you had fastboot mode - that wasn't fixup issue | 10:08 |
| T42 | <damnbruh2004> no no, the fastboot thingy is wsl misinterpretting the connection | 10:08 |
| T42 | <elros34> ok | 10:09 |
| T42 | <damnbruh2004> i fixed it by installing the usb netwroking module into wsl and getting telnet | 10:09 |
| T42 | <damnbruh2004> and then i sent you the logs, with mounting data failing | 10:09 |
| T42 | <elros34> now it should mount /data but if AUTOFS4_FS is not set then it will still fail to boot and telnet would work. It is useless kernel config btw | 10:13 |
| T42 | <damnbruh2004> Useless as in it takes no effect or as in it is nonsense in and of itself? | 10:14 |
| T42 | <elros34> you don't really need it so can be removed from init-script | 10:37 |
| T42 | <damnbruh2004> Aren't the kernel's features build based on its content? Hadk handbook says to edit it and then use the keenel checker utility | 10:42 |
| T42 | <damnbruh2004> I mean it says to find the config used, and various commonconfig files point to this one, so i started editing it and checker errors resolved then | 10:43 |
| T42 | <damnbruh2004> I'm really new to rom development and porting, hope you don't mind obvious questions | 10:45 |
| sharks[m] | "Obvious" questions are okay - you know how to search the channel logs though right? Always try that first | 10:51 |
| *** xmn__ is now known as xmn | 12:06 | |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!