| joff | hi all, my sony Xperia 10 III start and display "no active app" after enter code for unlocking ! | 12:35 |
|---|---|---|
| joff | how it's possible to reboot in a mode to backup my data after doing update failed to 5.1 from 5.0.0.77 ? | 12:39 |
| mal | joff: the installation zip contains recovery boot image | 12:45 |
| mal | and it's probably possible to continue the failed update but it does need to work in recovery | 12:47 |
| joff | mal : ok, how can i have access to recovery ? | 12:53 |
| joff | What can i do to do the complete update to 5.1.0.7 ? | 12:53 |
| mal | like I said, the recovery boot image in the installation zip, you flash that with fastboot to boot partition and then in recovery this gives some hints what to do https://gist.github.com/attah/849585a8839f5b4a5289506d83c19779 | 12:56 |
| joff | ok, thanks a lot, get recovery of version 5.1.0.7 or 5.0.0.77 ? | 12:58 |
| mal | either one is fine | 12:59 |
| joff | sorry mal | 13:13 |
| joff | i have done : fastboot flash recovery hybris-recovery.img | 13:13 |
| joff | it's what you said ? | 13:14 |
| mal | I said flash to boot partition | 13:15 |
| mal | when done with fixing the flash back hybris-boot.img to boot partition | 13:15 |
| joff | erf, it's not a problem what i've done ? | 13:16 |
| mal | no | 13:16 |
| joff | ok, and after flash, what can i do ? | 13:16 |
| joff | reboot to recovery | 13:17 |
| mal | just boot the device and it should go to recovery | 13:17 |
| joff | fastboot flash boot hybris-boot.img -> flash boot_b | 13:17 |
| joff | it's not boot_a ? | 13:18 |
| joff | active is _b | 13:18 |
| joff | i suppose | 13:18 |
| joff | "just boot the device" -> with a reboot ? or what command exactly ? | 13:19 |
| toastal_______________________ | me too @joff Xperia 10 V … I would assume that I didn’t quite have enough space on the device even tho I thought I did. | 13:21 |
| joff | i don't know if it's a space problem ! | 13:22 |
| toastal_______________________ | I’m in hybris-recovery right now. Disks seem okay… decryption is fine the SSHd starts too. | 13:23 |
| joff | How give more space available from recovery ? | 13:23 |
| mal | check the update log for the issue | 13:25 |
| toastal_______________________ | Well… it _is_ LVM so resizing should be possible. I did it 1½ years ago to have a separate /nix partition (I _really_ wish they would add `f2fs-tools` to the base image since the kernel supports it & my microSD is using it). | 13:25 |
| toastal_______________________ | @mal where is that log? | 13:26 |
| joff | How do you know if you boot in recovery mode ? Cause i have the same boot problem -> suppose not enter in recovery mode at boot | 13:26 |
| mal | https://gist.github.com/attah/849585a8839f5b4a5289506d83c19779 rootfs should be /rootfs in recovery so /rootfs/var/log/systemupdate.log in recovery | 13:26 |
| mal | joff: not sure what you mean | 13:27 |
| joff | recovery mode allow what connection ? ssh ? | 13:27 |
| mal | telnet for example, display should tell the ip, it should be 10.42.66.66 | 13:28 |
| joff | for telnet, must be an IP on the same subnet not ? | 13:29 |
| joff | 10.42.66.90 by example | 13:29 |
| joff | i just have display off and green light | 13:29 |
| mal | the ip if the device is 10.42.66.66 | 13:30 |
| mal | hmm, so you see nothing on display? | 13:30 |
| joff | nothing on display yes | 13:31 |
| mal | are you sure you rebooted normally | 13:31 |
| joff | maybe the flash wasn't on the good part _X | 13:31 |
| toastal_______________________ | > Error applying setting, reverse things back | 13:31 |
| mal | disconnect the cable, see if led goes off, then then power on the device with power button | 13:31 |
| toastal_______________________ | I see lots of info just about probing like battery info | 13:31 |
| joff | boot, the led is red | 13:32 |
| joff | and now, nothing in the display | 13:32 |
| mal | hmm, flash to both boot_a and boot_b just in case | 13:33 |
| joff | ok | 13:33 |
| joff | i boot directly with sailfishOS and led is green | 13:35 |
| toastal_______________________ | I can see some erase/installs in the logs *waay* back. | 13:36 |
| joff | i boot directly with sailfishOS picture and led is green => now, pad appear on display to unlock my device | 13:36 |
| toastal_______________________ | selinux: Unknown permission reload for class system | 13:36 |
| joff | fastboot boot recovery , no ? | 13:38 |
| mal | joff: I'm confused what you are doing, you didn't flash hybris-recovery.img to boot partition? | 13:38 |
| toastal_______________________ | Process '/bin/sh -c '/usr/bin/chown system:input /sys/devices/platform/soc/4784000.sdhci/leds/mmc1::/activate && /usr/bin/chmod -R 664 /sys/devices/platform/soc/4784000.sdhci/leds/mmc1::/activate'' failed with exit code 1. | 13:39 |
| toastal_______________________ | systemd-udevd[4079]: Process '/bin/mknod /dev/alien_video33 c 81 1' failed with exit code 1. | 13:39 |
| toastal_______________________ | Process '/bin/sh -c '/usr/bin/chown system:input /sys/devices/platform/soc/4784000.sdhci/leds/mmc1::/duration && /usr/bin/chmod -R 664 /sys/devices/platform/soc/4784000.sdhci/leds/mmc1::/duration'' failed with exit code 1. | 13:39 |
| toastal_______________________ | Process '/bin/sh -c '/usr/bin/chown system:input /sys/devices/platform/soc/4784000.sdhci/leds/mmc1::/state && /usr/bin/chmod -R 664 /sys/devices/platform/soc/4784000.sdhci/leds/mmc1::/state'' failed with exit code 1. | 13:39 |
| mal | toastal_______________________: you are looking at totally wrong messages, just look for anything from packagekit, zypp, upgrade or something like that | 13:40 |
| joff | i've done the wrong flash | 13:41 |
| joff | telnet access now | 13:41 |
| joff | what's the right command ? just telnet 10.42.66.66 ? cause telnet not openned on my laptop | 13:42 |
| mal | that should be correct | 13:42 |
| toastal_______________________ | packagekitd[1840]: [packagekit-zypp] Install progress update: 383 of 938 | 13:42 |
| toastal_______________________ | packagekitd[1840]: [packagekit-zypp] Install progress update: 384 of 938 | 13:42 |
| toastal_______________________ | mce[1045]: modules/cpu-keepalive.c: cka_session_finish(): long session lasted 224995 ms; id=5/undefined name=:1.13 owner=:1.13 pid=1840 uid=0 gid=0 priv=1 cmd=/usr/libexec/packagekitd --keep-environment | 13:42 |
| toastal_______________________ | looks like it doesn’t finish | 13:42 |
| mal | toastal_______________________: do you see any message why it failed? look for messages around that time, I assume too little space but make sure | 13:43 |
| joff | mal : what's the right port to connect with telnet ? 23 ? | 13:43 |
| mal | yes | 13:43 |
| joff | why don't want openned | 13:44 |
| toastal_______________________ | df -t shows me _now_ with like 600 MiB to spare… not the required 1.2, but it stopped in the middle of the install. Yeah, I don’t see anything strictly about space. | 13:45 |
| mal | joff: do you see usb interface on host? | 13:46 |
| joff | are you again here ? | 13:46 |
| joff | i do ssh access | 13:46 |
| mal | do you have the menu showing in ssh? | 13:47 |
| joff | i have the recovery menu | 13:47 |
| joff | start sshd | 13:47 |
| joff | what is the login for ssh ? | 13:47 |
| mal | I don't understand, how did you enable ssh? | 13:47 |
| joff | In the recovery menu from telnet | 13:48 |
| joff | i did 5) Run sshd | 13:48 |
| mal | why not just use telnet all the time? | 13:48 |
| mal | enabling ssh stops telnet | 13:48 |
| joff | ok | 13:48 |
| joff | 3) Shell so ? | 13:48 |
| mal | yes, use shell | 13:49 |
| joff | what command doing to check if space is enough ? | 13:50 |
| toastal_______________________ | df -h /rootfs | 13:51 |
| joff | available 1.1G | 13:51 |
| joff | maybe must i do more space | 13:51 |
| joff | but how ? | 13:51 |
| mal | check the upgrade log like I mentioned earlier /rootfs/var/log/systemupdate.log look for messages from packagekit | 13:52 |
| joff | full grep packagekit : https://debian-facile.org/paste-1EED291CF8-9c2d528d13c08dcb47e6dd46a0b5cfec | 13:53 |
| joff | more log : https://debian-facile.org/paste-2F4EF677D0-a4b991f0cc9432864626bef4c1fd6559 | 13:54 |
| joff | systemd[1]: sailfish-upgrade-ui.service: Main process exited, code=exited, status=1/FAILURE | 13:54 |
| joff | systemd[1]: sailfish-upgrade-ui.service: Triggering OnFailure= dependencies. | 13:55 |
| mal | ok, it seems to stopped in the middle of upgrade | 13:55 |
| joff | why ? not more space ? | 13:55 |
| mal | most likely space, wait a moment | 13:55 |
| joff | ok, thanks | 13:55 |
| toastal_______________________ | Mine failed an udisks… selinux error but I don’t see anything explicitly about space. Someone on the forums it seems hit the same issue despite at least thinking they too had the space. My still says 647 MB free in the middle of the upgrade | 13:59 |
| toastal_______________________ | I don’t mind reinstalling but is there something I should take note of & backup before a reflash? | 14:00 |
| mal | it's possible to continue the upgrade | 14:01 |
| toastal_______________________ | oh? | 14:02 |
| joff | for toastal or for me ? | 14:03 |
| mal | both | 14:03 |
| joff | ok, but maybe need more space ? but what path do to space ? | 14:03 |
| mal | check "du -hs /rootfs/var/log" | 14:05 |
| joff | 3 | 14:06 |
| joff | 3.0M | 14:06 |
| toastal_______________________ | 3.9M /rootfs/var/log | 14:06 |
| mal | ok, so that is not a problem | 14:07 |
| joff | opt 609M | 14:11 |
| mal | opt is appsupport | 14:11 |
| joff | 2.1G /rootfs/usr/ | 14:12 |
| joff | 542.2M /rootfs/system | 14:12 |
| mal | joff: could you try to mount home partition as instructed and then we can try on thing | 14:12 |
| mal | *one thing | 14:12 |
| joff | ok | 14:12 |
| mal | toastal_______________________: same for you | 14:13 |
| joff | done | 14:13 |
| mal | check that /home/.pk-zypp-dist-upgrade-cache and see if you can appsupport rpm there | 14:14 |
| mal | *can find | 14:14 |
| toastal_______________________ | does not exist | 14:14 |
| joff | /rootfs/home/.pk-zypp-dist-upgrade-cache EXIST | 14:14 |
| joff | mal : https://debian-facile.org/paste-3CEAE29046-58d5fa6ef11eb89be2abcc887c4bb75c | 14:15 |
| mal | try this: find /rootfs/home/.pk-zypp-dist-upgrade-cache/ -name '*appsupport*.rpm' | 14:15 |
| joff | i have : /rootfs/home/.pk-zypp-dist-upgrade-cache/packages/aliendalvik/aarch64/appsupport13-system-unprivileged-13.0.0.36.13-1.18.1.jolla.aarch64.rpm | 14:16 |
| mal | joff: did ytou run that "chroot /rootfs" as mentioned in the instructions? | 14:17 |
| joff | not now | 14:17 |
| joff | do you want ? | 14:17 |
| mal | yes | 14:17 |
| joff | done | 14:17 |
| mal | then run "rpm -U /rootfs/home/.pk-zypp-dist-upgrade-cache/packages/aliendalvik/aarch64/appsupport13-system-unprivileged-13.0.0.36.13-1.18.1.jolla.aarch64.rpm" | 14:17 |
| joff | error: open of /rootfs/home/.pk-zypp-dist-upgrade-cache/packages/aliendalvik/aarch64/appsupport13-system-unprivileged-13.0.0.36.13-1.18.1.jolla.aarch64.rpm failed: No such file or directory | 14:17 |
| mal | oops remove that /rootfs/ from the path | 14:18 |
| mal | so "rpm -U /home/.pk-zypp-dist-upgrade-cache/packages/aliendalvik/aarch64/appsupport13-system-unprivileged-13.0.0.36.13-1.18.1.jolla.aarch64.rpm" | 14:18 |
| joff | done | 14:18 |
| mal | it installed without issues? | 14:18 |
| joff | https://debian-facile.org/paste-8DD3A5B22F-92b5ca25f6805f12160f5f7a87386443 | 14:18 |
| toastal_______________________ | > rpm: invalid option -- 'U' | 14:18 |
| joff | warning | 14:19 |
| mal | joff: that warning is normal | 14:19 |
| joff | ok | 14:19 |
| mal | joff: does running "pkcon" do anything? | 14:19 |
| toastal_______________________ | I also don’t have that directory | 14:19 |
| joff | must i do pkcon ? | 14:20 |
| mal | joff: just to test that packagekit can work | 14:20 |
| joff | pkcon | 14:20 |
| joff | Failed to contact PackageKit: Could not connect: No such file or directory | 14:20 |
| mal | joff: that is ok, just wanted to make sure it didn't show library errors | 14:20 |
| joff | exit chroot before ? | 14:20 |
| joff | ok | 14:21 |
| joff | make more free space maybe ? | 14:21 |
| joff | df -h | 14:21 |
| joff | Filesystem Size Used Available Use% Mounted on | 14:21 |
| joff | /dev/sailfish/root 4.7G 3.6G 1.1G 77% / | 14:22 |
| mal | joff: now exit chroot, then umount home and do that last command to trigger update on next boot, but don't reboot but power off and then flash back hybris-boot to boot partition and then boot | 14:22 |
| mal | joff: after we just installed that appsupport it should not require much space anymore | 14:22 |
| mal | toastal_______________________: did you mount home partition? | 14:23 |
| joff | power off = launch halt -f ? | 14:24 |
| joff | mal : why installation stopped/failed so ? | 14:24 |
| toastal_______________________ | I don’t think so? What’s the command to so since I didn’t see it in the history & forgot how LVM mountpoints wore | 14:24 |
| toastal_______________________ | work* | 14:24 |
| mal | toastal_______________________: https://gist.github.com/attah/849585a8839f5b4a5289506d83c19779 | 14:25 |
| mal | joff: most likely it just ran out of space | 14:27 |
| joff | stay on recovery with power button hold on | 14:27 |
| mal | joff: what? | 14:27 |
| joff | how do a power off on sony xperia 10 III ? | 14:27 |
| toastal_______________________ | oh there it is | 14:27 |
| mal | joff: volume up + power button for 10 seconds | 14:28 |
| mal | joff: that is the way to force it off | 14:28 |
| joff | don't arrived | 14:30 |
| mal | joff: what? | 14:30 |
| joff | to force it off | 14:30 |
| mal | so you can't get it to power off? | 14:31 |
| joff | always boot in recovery mode | 14:32 |
| mal | joff: I said to flash back hybris-boot with fastboot to boot partition | 14:32 |
| joff | i know | 14:32 |
| mal | cat you get to fastboot mode? | 14:32 |
| mal | *can you | 14:32 |
| joff | can't arrived to switch off the phone | 14:33 |
| joff | always reboot | 14:33 |
| mal | you have disconnected the cable? | 14:33 |
| joff | yes | 14:34 |
| joff | it always reboot :/ | 14:34 |
| mal | and used that force poweroff? did you wait long enough, at about 5 seconds it should vibrate once and that means it would reboot, about 10 seconds it should vibrate 3 times and if you then release the buttons it should poweroff | 14:34 |
| joff | yes, it's ok, thank you | 14:35 |
| joff | erf, can't entern after this in fastboot mode | 14:37 |
| mal | joff: hmm, that seems strange, you did it the same way as before? | 14:38 |
| joff | After power Off, what can i do to enter in fastboot mode ? | 14:38 |
| mal | press volume up and plug usb cable | 14:39 |
| mal | keep it pressed while connecting the cable, you should see blue led after that | 14:39 |
| joff | i did it but no led appear | 14:39 |
| joff | nothing appear on display | 14:40 |
| mal | joff: "fastboot devices" on computer doesn't show anything? | 14:40 |
| joff | it's good | 14:41 |
| joff | switch port on my laptop | 14:41 |
| joff | update is running | 14:44 |
| joff | sailfishos can not update | 14:44 |
| joff | retry later | 14:44 |
| joff | :/ | 14:44 |
| mal | go back to recovery and check update log | 14:44 |
| joff | no time now :/ | 14:47 |
| joff | afk with my daughter | 14:47 |
| toastal_______________________ | I’m taking a look at resizing my partitions to not run into this while I’m here so I need report back later as well. | 14:59 |
| piggz[m] | We had better enable chum 5.1 | 15:04 |
| piggz[m] | nephros_: added you to chum main to take the burden of pushing all the changes from testing through :) | 17:44 |
| *** Mister_Magister_ is now known as Mister_Magister | 18:17 | |
| *** Mister_Magister_ is now known as Mister_Magister | 18:42 | |
| *** Mister_Magister_ is now known as Mister_Magister | 18:50 | |
| joff | re mal, sorry, you're here ? | 18:56 |
| toastal_______________________ | > ln -s /var/lib/sailfish-update/update_info.ini /rootfs/system-update | 19:01 |
| toastal_______________________ | How is this supposed to work if recovery doesn’t have /var/lib/…? | 19:01 |
| attah | trust the process (: | 19:02 |
| toastal_______________________ | Also, I am thankful this is OFTC… Libera.Chat has my IP banned as a VPN (it isn’). | 19:02 |
| attah | can you please stop screwing up the nick column? | 19:03 |
| joff | here my all log systemupdate.log | 19:03 |
| joff | https://debian-facile.org/paste-229277CEBA-0ae69e2abd6dad60ae710b25b7b0f879 | 19:03 |
| attah | If it was my server i'd ban you for abuse of underscores | 19:03 |
| attah | (briefly :) | 19:03 |
| toastal_______________________ | rofl… Biboumi connects weird sometimes | 19:04 |
| joff | attah or mal can help to continue update process ? | 19:05 |
| attah | trying to look at it | 19:05 |
| joff | ok, thanks a lot | 19:06 |
| attah | but very little actual systemupdate in that log | 19:06 |
| joff | very little ? | 19:06 |
| attah | i'd almost have said you picked a random journal log from a normal system | 19:06 |
| joff | size file or size font ? | 19:06 |
| attah | *content* | 19:07 |
| attah | as in no zypper, rpm etc | 19:07 |
| joff | ok, but, give me a command ? | 19:07 |
| attah | huh? | 19:07 |
| joff | what can i do to have more zypper, rpm etc for you to help me ? | 19:08 |
| attah | It is supposed to be there in systemupdate.log | 19:09 |
| attah | What did you do up until that point? | 19:09 |
| attah | Just one failed update and entered recovery - or something more? | 19:09 |
| joff | cat /rootfs/var/log/systemupdate.log | grep packagekit | 19:09 |
| joff | mai 28 16:43:41 Xperia10III dbus-daemon[1119]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.13' (uid=0 pid=1453 comm="/usr/libexec/sailfish-upgrade-ui" label="u:r:kernel:s0") | 19:09 |
| joff | mai 28 16:43:41 Xperia10III dbus-daemon[1119]: dbus-daemon[1119]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.13' (uid=0 pid=1453 comm="/usr/libexec/sailfish-upgrade-ui" label="u:r:kernel:s0") | 19:09 |
| joff | mai 28 16:43:41 Xperia10III packagekitd[1526]: Failed to load the backend: opening module zypp failed : /usr/lib64/libzypp.so.1722: undefined symbol: _ZN6google8protobuf11MessageLite15ParseFromStringEN4absl12lts_2023080211string_viewE | 19:09 |
| Keto | looks like packagekit failed to start, from that log | 19:09 |
| attah | joff: what you pasted does not have that | 19:10 |
| attah | did you share the wrong file? | 19:10 |
| joff | not | 19:10 |
| attah | yes, not | 19:10 |
| joff | from recovery : cat /rootfs/var/log/systemupdate.log | grep packagekit | 19:10 |
| joff | mai 28 16:43:41 Xperia10III dbus-daemon[1119]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.13' (uid=0 pid=1453 comm="/usr/libexec/sailfish-upgrade-ui" label="u:r:kernel:s0") | 19:10 |
| joff | mai 28 16:43:41 Xperia10III dbus-daemon[1119]: dbus-daemon[1119]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.13' (uid=0 pid=1453 comm="/usr/libexec/sailfish-upgrade-ui" label="u:r:kernel:s0") | 19:10 |
| joff | mai 28 16:43:41 Xperia10III packagekitd[1526]: Failed to load the backend: opening module zypp failed : /usr/lib64/libzypp.so.1722: undefined symbol: _ZN6google8protobuf11MessageLite15ParseFromStringEN4absl12lts_2023080211string_viewE | 19:10 |
| joff | sorry ! | 19:10 |
| joff | my command : cat /rootfs/var/log/systemupdate.log | grep packagekit | 19:11 |
| attah | but the debian pastebin you skared has none of that | 19:11 |
| joff | debian pastebin was the entire lines/file | 19:11 |
| joff | not entire file sorry, terminal max buffer | 19:11 |
| attah | it has exactly ZERO search hits for "zypp" | 19:11 |
| joff | cat /rootfs/var/log/systemupdate.log | grep zypp | 19:12 |
| joff | mai 28 16:43:41 Xperia10III packagekitd[1526]: Failed to load the backend: opening module zypp failed : /usr/lib64/libzypp.so.1722: undefined symbol: _ZN6google8protobuf11MessageLite15ParseFromStringEN4absl12lts_2023080211string_viewE | 19:12 |
| attah | please just share the entire thing | 19:12 |
| Keto | no need to share the entire thing | 19:12 |
| joff | how ? the size is so big | 19:12 |
| attah | no but a need to learn | 19:12 |
| Keto | that line already telss that it's the libyaml or what ever it was that has not been updated correctly | 19:13 |
| attah | how does one copy more tahn what's on screen - by scrolling perhaps? | 19:14 |
| toastal_______________________ | I grew my sailfish-root LVM+LUKS+ext4 part from 5 GB to 10 GB. Wish me luck. | 19:15 |
| attah | So you are going to need to "rpm -Uhv" yaml-cpp and libzypp from the /home/.pk-zypp-dist-upgrade-cache | 19:15 |
| attah | so first find them and then install them | 19:16 |
| Keto | joff: like earlier, mount home and chroot to the rootfs. do you have the commands for that? | 19:18 |
| attah | See here for commands https://gist.github.com/attah/849585a8839f5b4a5289506d83c19779 | 19:19 |
| joff_ | sorry | 19:19 |
| attah | So you are going to need to "rpm -Uhv" yaml-cpp and libzypp from the /home/.pk-zypp-dist-upgrade-cache | 19:20 |
| attah | so first find them and then install them | 19:20 |
| attah | See here for commands https://gist.github.com/attah/849585a8839f5b4a5289506d83c19779 | 19:20 |
| joff_ | ok, thanks | 19:20 |
| toastal_______________________ | Well I got back to the flashing No Apps… the code snippet wasn’t clear _what_ would need to be installed so I skipped it. | 19:22 |
| Keto | find /home/.pk-zypp-dist-upgrade-cache -name 'yaml-cpp-*' | 19:22 |
| Keto | that should find the yaml-cpp rpm | 19:23 |
| attah | What needs to be installed depends on what went wrong and will likely vary. | 19:23 |
| attah | This time people seem to be hitting the same stuff, but for example next update very likely won't. | 19:24 |
| attah | i.e. the instructions *can't* be clear on what needs installing | 19:24 |
| Keto | once you have install the yaml-cpp rpm, you can try running zypp-NameReqPrv | 19:26 |
| joff_ | i must go, see you tomorrow | 19:27 |
| Keto | that will tell if all the libraries needed by zypp are in place | 19:27 |
| Keto | it will show the help message if everything is ok | 19:28 |
| Keto | if it gives error while loading shared libraries, let us know and we'll tel the next package | 19:29 |
| toastal_______________________ | I tried rpm install finding all RPMs but that doesn’t work ha | 19:29 |
| toastal_______________________ | find /home/.pk-zypp-dist-upgrade-cache -name 'yaml-cpp-*' | 19:29 |
| toastal_______________________ | this returned nothing tho | 19:29 |
| attah | toastal_______________________: are you inte mounted and chrooted state=? | 19:30 |
| toastal_______________________ | yup… wouldn’t be in fish shell instead of that default shell otherwise :) | 19:30 |
| Keto | are there any rpms in there? | 19:31 |
| toastal_______________________ | find /home/.pk-zypp-dist-upgrade-cache -iname '*.rpm' | wc -l | 19:32 |
| toastal_______________________ | 531 | 19:32 |
| toastal_______________________ | maybe the 532nd was yaml-cpp | 19:33 |
| attah | and | grep yaml? | 19:33 |
| toastal_______________________ | nothing | 19:33 |
| attah | And you have read systemupdate.log and seen that libzypp protobuf error like joff? | 19:34 |
| toastal_______________________ | Oh I didn’t have that error… dunno what my error was. It just stopped in installing some VPN software… printing out a mile of battery+thermal info | 19:35 |
| Keto | try running that zypp-NameReqPrv | 19:36 |
| toastal_______________________ | Is there a good way to fetch out the log via telnet or ssh? scp? | 19:36 |
| toastal_______________________ | I get the help text | 19:36 |
| attah | I think tehre is some option to start sshd in recovery? | 19:36 |
| attah | that+scp? | 19:37 |
| toastal_______________________ | yea | 19:37 |
| Keto | ok, so then the problem isn't any missing library | 19:37 |
| Keto | or at leas not from libzypp dependencies | 19:38 |
| *** Mister_Magister_ is now known as Mister_Magister | 19:38 | |
| toastal_______________________ | Ah crap. The file was truncated… probably on reboot. | 19:39 |
| toastal_______________________ | Any manual trigger that works from recovery? | 19:41 |
| toastal_______________________ | I did the symlink step without rpm installing anything, unmounted, rebooted. It boot looped once. Then I got the no apps. | 19:42 |
| toastal_______________________ | Not ideal, but do I just reflash? Can /-only be done since /home seems fine? | 19:43 |
| attah | Did the log say anything of interest at all? | 19:50 |
| ewo1 | Hi guys | 19:50 |
| attah | People posting a tiny fraction of a file and then acting surprised we can't help really is not good for my blood pressure | 19:50 |
| ewo1 | Just wanted to ask - so I've found this which looks like a pretty thorough way of flashing Sailfish https://gitlab.com/Olf0/sailfishX | 19:51 |
| ewo1 | But I was wondering for Xperia 10 III, whats generally the best android version/sony blobs to use? | 19:52 |
| toastal_______________________ | I meantion it earlier. I combed thru the log & it just, like, stopped after installing openconnect or something like that… then gave a wall of battery+thermal info. Nothing about ran out of storage or something that seemed useful with my comb. | 19:53 |
| * ewo was wondering why my nick was taken by my own server | 19:55 | |
| attah | ewo: Some people say some blobs do x y and z. Some of it is probably true. I have exactly what the official installation instructions said however many years ago, and no issues. | 19:55 |
| ewo | attah: fair | 19:56 |
| ewo | some people on the forums seem to say the v2a blobs are the best | 19:56 |
| Keto | toastal_______________________: it's not possible to flash just the / | 19:57 |
| ewo | because they get rid of the green tint/brightness issue and also issues with call echo | 19:57 |
| Keto | toastal_______________________: also could you do /nick toastal or something | 19:57 |
| attah | ewo: Read up, make a guess, test the 2 or 3 main issues they claim it is better or worse at. | 19:58 |
| ewo | also in the guide olf mentions maybe because jolla was testing on android 11 but maybe the latest android 12/13 would be better since it has firmware there too | 19:58 |
| ewo | attah: yeah I need to chef up a USB so I can run Windows/Emma to reflash | 19:59 |
| toastal_______________________ | /nick toastal | 19:59 |
| ewo | I was thinking of using Xen/Alpine linux so thats another thing on the list :-) | 20:00 |
| attah | Whaẗ́s on it now? If it is something that can be flashed over, just take that and be happy. | 20:01 |
| Keto | toastal_______________________: or what ever changes the nick in your irc client... that tail is a bit annoying | 20:02 |
| toastal_______________________ | /nick toastal | 20:02 |
| Keto | yeah, that does not seem to work | 20:02 |
| toastal_______________________ | no it does not seem to :| | 20:03 |
| ewo | attah: It's running 5.0.77 at the moment, I can't remember if it was android 11/12/13 I used but it was the v3a binaries | 20:03 |
| ewo | My sim reception etc has been awful as of late so I might try for that too, it drops a lot | 20:03 |
| ewo | But that might be the state of UK mobile networks :-) | 20:04 |
| attah | sim is an identification card, like a license plate - "sim connection" is nonsensical | 20:05 |
| attah | For all the voodoo prescribed to various blobs and flashed-over android versions, cellular signal strength i think has never been one | 20:06 |
| ewo | attah: fair play thanks | 20:06 |
| *** toastal_______________________ is now known as toastal | 20:06 | |
| toastal | hi? | 20:06 |
| attah | wow, no tail | 20:07 |
| toastal | I had to DM `NICK` to the … main thingy when you connect. Dunno. | 20:07 |
| toastal | I YOLO’d force installing all of the RPMs. This allowed me to at least reboot into the device & run `version --dup` . Now I am on 5.1.0.8 & not entirely sure why. | 21:33 |
| toastal | But keyboard now has haptics, & UI is noticably snappy instead of laggy 😮 | 21:34 |
| toastal | I stole space from my /nix part on f2fs so tomorrow I will need to build f2fs-tools from source to rebuild since it supports grow but not shrink. | 21:36 |
| toastal | It really needs to be in the repos for its purpose-made for these microSD cards | 21:37 |
| FireFly | seems 5.1.0.8 was released in the meantime indeed, hm | 21:43 |
| FireFly | ah diskspace check fix thingy | 21:44 |
| toastal | Growing to 10 GB was my fix | 21:44 |
| toastal | Tested. Yes, still no headphone support on 10 V. Stupid Qualcomm blobs. | 21:45 |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!