Friday, 2018-06-08

birdzhang_pclbt: the target has bugs, "zypper lr" has no repos but "ssu lr" have, after use "zypper ar url name" one by one can resolve it.01:33
birdzhang_pc the targets updated, may fix unresolvable problem01:47
RoybentPorts & harbours03:28
kimmolitried pkcon refresh?04:03
ghosalmartinmorning all :)07:58
lbt2.2.0.29 is working now and I restored it to nemo:testing:hw:common which is building08:40
lbtmal: ping08:40
lbtmal: I noticed something odd in the release we did - it has a section in the prjconf which seems to have made it into public by mistake. It overrides the Release value with "10.<CI_CNT>.<B_CNT>" instead of "1.<CI_CNT>.<B_CNT>"08:42
lbtso if you have noticed rpms being built with a version of 10 that would explain it08:43
lbtthis seems to have been reverted in but it may have an impact on doing an upgrade08:43
lbtsledges: ^^ when you're back08:43
mallbt: thanks09:05
steeeveDo i need to install new targets and toolings to compile
mallbt: sledges also at some point we should change latest to 2.2 in OBS09:11
lbtmal: is now good?09:15
lbtactually mal - could you just do a quick look at that version thing09:16
mallbt: isn't that 10.x.y normal? it seems to be in other targets also09:25
lbtoh dear09:26
lbtI haven't checked back09:26
mallbt: for example
r0kk3rzhmm i think theres patterns changes on this one :)09:28
r0kk3rzi suppose we need the latest dhd09:28
malr0kk3rz: and you need to update config submodule and make sure you build latest pulseaudio etc09:28
mal*pulseaudio plugin09:28
T4<adampigg> Yes, i think latest everything is needed for eg pa11 upgrade10:03
r0kk3rzwell once obs stops churning i can try10:04
malit will probably take a while before it builds everything10:05
* tom13 tries out latest ne-kit image10:08
tom13maybe this time i can get more than 2GB root partition10:37
tom13ah need to install cm11, then, then in one go12:09
tom13awsome  'ok'is  ctrl  on  xt89413:06
tom13what is sym  though/?13:07
mallbt: a little question, how can I get rid of some rpms from an OBS build, the build is disabled for those packages but the old rpms still remain in the repo13:26
lbtosc wipebinaries13:26
lbtnp :)13:27
lbtas with all osc commands the -h option is useful13:27
malyep, I again first tried to look for the fix in mer OBS website, not osc13:28
T4<abhishek_0> error while making zip13:33
T4<abhishek_0> did i do something wrong ?13:36
mal@abhishek_0 show your device repo, I assume you have the repos in github somewhere13:39
mal*config repo13:39
T4<abhishek_0> mal , with only one change not committed yet,13:40
mal@abhishek_0 you should update submodule if you haven't done it already, and also other adaptation repos should built using latest versions, assuming you are building
T4<abhishek_0> mal just checked it, submodules are already updated, and i am on the latest target13:48
T4<abhishek_0> Toolings: …  SailfishOS-latest … Targets: …  SailfishOS-latest-i486 …  wingtech-wt88047-armv7hl13:50
malthen update your github, it's still using old submodule13:51
mal@abhishek_0 also the tmp folder shouldn't be in config repo, neither should documentation.list13:52
r0kk3rzwell that built ok14:00
r0kk3rzi wonder if it works14:00
T4<abhishek_0> dammit ... i hate git14:12
T4<abhishek_0> mal : i committed the stuff ,  can you check it out ?14:23
mal@abhishek_0 otherwise ok but you didn't remove the extra files (those do now harm actually but I just like clean source repos)14:24
T4<abhishek_0> i should remove those temp folder and that documentaion.list ?14:26
mal@abhishek_0 those are generated during build so those shouldn't be there if you want the sources to be nice and clean14:27
T4<abhishek_0> OCD ? XD14:28
malnot really, I just prefer clean sources and also nice commit history, if you look here you can a reasonably clean commit history
mal*can see14:30
T4<abhishek_0> my history is not that bad either :-P14:37
T4<abhishek_0> anyway .. what is the fix for my error ?14:37
malso you rebuilt things and mic still fails?14:38
r0kk3rzthe fix is to ask better questions :P14:41
T4<abhishek_0> mal do i have to run full again ?14:47
malat least config package, and maybe version also14:48
maldid you follow the usual debug instructions in hadk pdf for such errors14:49
malNeoChapay: it seems your mer:up project doesn't have permissions for cibot so webhooks fail14:51
Mister_Magistermal: any special notes on making 2.2 update?15:45
Mister_MagisterUodating pa-module-droid i suppose15:46
malMister_Magister: update pa modules (droid and droid-glue), ngfd plugin, config submodule15:47
Mister_MagisterKk thanks15:50
T4<abhishek_0> pulseaudio-modules-droid-11.1.68-1.armv7hl this package is needed17:53
malI mentioned earlier today what needs to be updated for 2.217:54
r0kk3rzhok, running mic inside a docker, should be able to slam that on gitlab-ci18:21
Nokius_r0kk3rz: yeah I was thinking about this a few times18:37
Nokius_r0kk3rz: somehow I stuped having mer docker env18:38
r0kk3rzthe platform sdk doesnt really like being in a docker18:39
r0kk3rzit would be nice to be able to use sb2 and mb2 for things18:39
Nokius_r0kk3rz: what did to fix that.18:39
Nokius_it toke me a while to get that done18:40
r0kk3rzbut running mic on a .ks to build an image from obs repos is useful enough18:40
Nokius_r0kk3rz: what is your issue18:40
r0kk3rzi havent fixed it yet18:40
Nokius_r0kk3rz: I wanted to build HADK ubuntu env but repos are broken for mer :'(18:40
r0kk3rzoh its just the sdk-assistant scripts, but i should be able to create a target old style18:40
Nokius_r0kk3rz: yeap that should work18:42
r0kk3rzbut its ok for now18:42
r0kk3rzNokius_: i baked a new scorpion image if you want to try18:44
Nokius_yes !!18:45
*** Nokius_ is now known as Nokius18:46
mal2.2.0.29 works very well on fp218:46
r0kk3rzNokius: ^^ i havent tried it on windy yet, so who knows18:47
Nokiusr0kk3rz: aws? nice and fast18:50
Nokiusr0kk3rz: what else :DD18:52
Nokiusr0kk3rz: mine needs some charing18:55
piggzmal: currently, my libhybris is n64-rpm ... is that still thebest option for me?19:06
malpiggz: master19:27
malpiggz: everyone should use master now19:28
steeeveHow can i create a zip that doesnt trigger the whole rootfs but just updates the existing one, if it's possible?19:41
r0kk3rzyou use OTA from obs19:44
malyep, sailfish doesn't handle update zips, OTA is the way19:44
r0kk3rzwelp its doing something....
Nokiusr0kk3rz: hop it's not running out19:46
Nokiusr0kk3rz: how to get into recovery19:47
Nokiuswonder if nh1402[m] had to flash twrp19:47
r0kk3rzNokius: you need to reflash the aosp boot.img to get to twrp19:47
r0kk3rzits a bit annoying, but so is trying to fix it :)19:48
opendataScorpion is nicr19:50
opendataI can send a mainline kernel that'll work on that if you want19:50
r0kk3rzdefine *work*, freedreno graphics?19:52
nh1402[m]Nokius: I think I did, yes.19:57
steeeveI dont have obs, yet20:04
r0kk3rzi think it wurked!20:24
Nokiuswoop woop20:25
T4<abhishek_0> steeeve ask lbt for an account and setup the obs20:38
steeeveHe's not in the channel20:41
Nokiuslbt: ^20:43
Nokiussteeeve: he is :P20:43
Nokiusr0kk3rz: how can I do this?20:43
steeeveIn irccloud channel list i dont see him20:44
r0kk3rzNokius: do what?20:44
Nokiusthis falshing harakiri20:45
r0kk3rzyou flash the aosp boot.img with fastboot20:46
r0kk3rzthen hit the key on bootup to get into twrp20:46
Nokiusmagic thx20:50
Nokiusr0kk3rz: do I need to flash twrp at some point?21:29
r0kk3rzit lives in the fota partition, so it only needs to be done once21:29
Nokiusr0kk3rz: I do "fastboot -S 256M flash boot boot.img" then fastboot reboot and hold vol down but nothig happens21:35
r0kk3rzyou dont need to hold it, it should LED purple, then you press, then it goes orange21:35
r0kk3rzthen twrp boots21:35
Nokiusr0kk3rz: thanks got in there!21:38
tom13NeKit: here?21:43
Nokiusr0kk3rz: product device fails :(21:43
r0kk3rzperhaps i built it wrong21:45
r0kk3rzdoes it think its a scorpion_windy image?21:45
Nokiusno it fails cos it scorpion really odd21:47
Nokiusr0kk3rz: no my recovery assumes it's windy :O21:49
r0kk3rzthat seems wrong21:50
Nokiusnice twrp broke22:01
Nokiusr0kk3rz: boom22:23
Nokiusr0kk3rz: something is wrong with mobile setting is missing things there fo22:26
Nokiusrest looks as shown in BRU22:27
Nokiuscamera is working videos are green :D22:27
steeeveabhishek: how did you fix the error when building with mic? Im getting it, too D:22:50
malsteeeve: did you update the things I mentioned earlier today on this channel?22:59
steeeveYes, the submodules22:59
steeeveIve never updated submodules, so, i used this command that i found on google: "git submodule update --remote --merge" maybe it's wrong but it seems he'd done his job23:01
maland the few packages I also mentioned23:01
malsteeeve: better check the git log in the submodule folder to see it match the source repo23:02
steeeveIve updated submodules before building everything, so, i think there's no need to do it again, ill check the git log instead23:03
steeeveThis is my log:
steeeveFirst command is from the merge23:06
malsteeeve: well that is just wrong23:07
malyou do not merge submodule you just pull the latest version, why didn't you follow faq?23:07
steeeveHaha again :/23:08
steeevemal: that's what i did23:10
malmaybe check the same here as it has better formatting
steeeveIn fact git pull says "already up to date"23:10
malsteeeve: you won't get the history you have if you did that23:10
malyou then did something wrong23:11
steeeveThat has no sense23:11
malI just tested on my sources and the method works correctly23:13
malso you really did something incorrectly23:13
steeeveWhat about this ?23:13
steeeveI meant23:13
steeeveSeems good23:14
malyes, that is correct23:14
malbut the log you gave before was wrong23:15
steeeveThat's what is in my local repo23:15
steeevePlus first log commit23:15
malI don't understand23:16
steeeveBasically i have updated submodules 2 times :P23:16
malis that the same repo or not?23:16
malso what is the problem, I don't understand23:17
steeeveDont consider the log, there's something in plus23:17
malif that repo is correct how can local repo be different? or what repo did you use to push the changes?23:17
steeeveThe problem is that mic fails23:17
steeeveI used the same repo, but after initializing the updated submodule i ran git pull origin master which generated the first commit in the log23:18
steeeveOdd but not wrong :D23:18
malwell it is wrong23:18
steeeveI'll resync, then23:19
malno, just fix it manually23:19
malI hate it when the first solution people think of it resync23:20
steeeveLol, too late23:23
steeevemal: the problem persist23:30
steeeveAnd now i have a perfect git log23:31
steeeveAnd i built configs and ran (excluding things like libhybris and company)23:31
malsteeeve: did you update some of the of the packages like I said23:35
steeeveConfigs and vesion23:36
malso you are so lazy to not look at channel logs?23:36
steeeveYou read my mind23:37
mallooking at channel logs seems to be too difficult for a lot of people23:38
steeeveYay i don't know why they still record them23:40
tom13i have a great idea - instead of the onscreen 'back' button in alien dalvik, use the phone's hardware back button23:40
steeeveI updated the target23:41
steeeveDo i need to reinstall the latest one instead?23:41
steeevetom13: a genius23:41
tom13ok got the defects labeled23:51
tom13kernel 3.0.8  is meh23:52

Generated by 2.17.1 by Marius Gedminas - find it at!