Monday, 2018-06-11

diegosace2000good day someone can make me a port please01:53
diegosace2000FOR A LENOVO YOGA TAB 301:54
diego_is there someone02:09
birdzhang_diegosace999: and can help you02:16
pseudodevtar not fount in platform sdk06:34
T4<adampigg> Mal, abranson, camera fixed!06:39
T4<adampigg> Next wifi tethering working in 2.2 for anyone? Has anything changed in it?06:40
T4<adampigg> I can connect,  but it doesnt seem to be forwarding packets for me06:40
abransonadampigg: what was it??06:44
T4<adampigg> Abranson, camera hal is 32bit, but i built 64bin minimediaservice06:54
abransonadampigg: gah! was that visible in the journal?06:55
T4<adampigg> Abranson, i worked it out by copying the camera hal to lib64, and the error changed.  instead of not finding it, it now couldnt load it because of the wrong arch, and then it hit me06:57
abransonhad something similar recently where I couldn't find where something was going wrong that looked fine in logcat and gst_debug where you expect all the media to be. turned out the process was crashing, and you generally only see that in the journal.06:59
r0kk3rzNokius: where did you get that twrp image from?07:54
T4<adampigg> Can some of you test out tetgering on 2.2, ta08:01
r0kk3rzNokius: id use the official TWRP link and flash to fotakernel -
T4<adampigg> hmm, i can tether now08:33
T4<adampigg> browser seems wot even stay open long enough for me to press the stop button08:38
pseudodevWhy do i get "ubu-chroot: command not found" ??08:40
birdzhang_adampigg: did you add this ?
r0kk3rzNokius: do you have an xda developers account?08:42
T4<adampigg> birdzhang_ i didnt,cheers ill try ok tho08:43
r0kk3rzmeh this is lame, i dont want to spam about several threads just to make a devdb on xda...09:21
tom13NeKitTelegram[m]:  your new  xt894 image works great!   keyboard backlight stays off though.09:23
*** tbr is now known as merbot11:11
*** merbot is now known as tbr11:12
*** merbot` is now known as merbot11:12
T4<abhishek_0> cant build droidmedia12:38
malinstall tar?12:39
r0kk3rznah thats way too obvious :P12:40
T4<abhishek_0> tar is already installed lol XD12:40
T4<abhishek_0> wait a minute .. zypper is the command right ?12:41
mal@abhishek_0 installed where? target, sdk or what?12:42
T4<abhishek_0> platform sdk12:43
mal@abhishek_0 did you try sb2 -t $VENDOR-$DEVICE-$PORT_ARCH -R -m sdk-install zypper in tar12:43
lolekso, do you guys have any estimate when sailfish 2.2 community will be availabel for xperia x?12:43
malr0kk3rz: who is maintaining that?12:44
r0kk3rzmal: probably nobody, but the repo has ghosalmartins name on it12:44
lolekr0kk3rz tbh it would be good to check this to see the status of it12:45
r0kk3rzi would expect most people bought sailfish x, and so jolla maintains it12:45
lolekkind of true but I don't wanna pay for something that's not working :P12:46
lolekso I'd better like to test this12:46
T4<adampigg> abranson, mal, best way to auto-remove gst-omx (and gst-libav?) add obsoletes: line in one of my pattterns?12:47
abransonyeah think so12:47
malr0kk3rz: ok, need to ask ghosalmartin when he comes back here12:47
abransonthough removing the config file will make sure it never gets used for anything12:47
T4<adampigg> k12:48
r0kk3rzlolek: jolla maintains it in the open, so its just a case of building it12:48
lolekwell you remember what I told you?12:49
lolekI can't update to 2.2.x as then my x is useless and I have to reflash it to
r0kk3rzyeah and?12:49
lolekand from what I understand, it looks that it should be just enough for me to update but it's not12:50
r0kk3rzyou have two paths, either pay and get jollas support, or you support yourself12:50
elrosno one can share official image? afaik proprietary stuff are downloaded from store so it should be fine I guess12:52
lolekr0kk3rz but from what I understand, the ota should just work12:53
r0kk3rzit might, depending on what repos are enabled on that image12:53
r0kk3rzbut clearly, as you say, it doesnt12:53
elroslolek: just type ssu lr12:54
lolekright now I have to flash it back first12:54
lolekand tbh flashing it back is not the big problem, it's the mandatory tutorial :/12:58
r0kk3rzso skip it :P12:58
lolekr0kk3rz how?13:00
r0kk3rztap corners clockwise starting top left13:00
lolekr0kk3rz you're joking?13:04
lolekerm ok works...13:05
T4<adampigg> i was so glad when i found the 4 corners shortcut13:05
r0kk3rzlolek: you really think the jolla guys go through the tutorial every time ;)13:06
tom13yeah.  a 'skip tutorial' button would have been preferable though13:06
lolekr0kk3rz no idea :P13:07
elrosit's is there when you start tutorial from app drawer13:07
elroslolek: as you can see these repos: are unmaintained so you can't just upgrade to newer version13:21
lolekelros: so the only option is to get paid support?14:00
elrosno, you can take care of repo and upgrade it :P I would ask somebody for official image or at least official repos14:02
T4<abhishek_0> okay .. in the new build .. everything works .. except for "anything gstreamer"15:03
T4<abhishek_0> camera doesn't launch .. videos doesnt play15:04
r0kk3rzcool story bro15:06
T4<abhishek_0> r0kk3rz i got that reference -_-15:09
T4<abhishek_0> but seriously tho.. i wanna know how to fix it15:11
malare mini* service processes running?15:14
tom13XA2 does look very solid15:16
vknechtis OBS ok ? just tagged a dcd release and it's not picked up and rebuilt15:17
vknecht(manual rebuild from web interface used local cache)15:19
T4<abhishek_0> mal [root@Sailfish nemo]# ps cax | grep mini …  8832 ?        Sl     0:00 minisfservice15:20
r0kk3rzabhishek: so whats missing?15:21
T4<abhishek_0> let me grab some other logs15:21
mal@abhishek_0 you need to figure out why minimediaservice is failing, also don't you need miniafservice for call audio?15:30
mal@abhishek_0 in case your device is 64-bit did you build correct bit versions of those services?15:30
vknechtfunny, /qemu_encpartition_20180527-142304_16740.core file on device...15:34
T4<abhishek_0> mal : yes i built the right version ..15:34
T4<abhishek_0> dmesg line 97115:34
vknechtthat comes from image build, right ?15:34
mal@abhishek_0 that is no a problem, maybe, but you did something that wasn't supposed to be done in 14.1 base, the mini* services are in servicemanager.rc in 14.1. not in init.rc15:35
mal@abhishek_0 did those services work before?15:36
T4<abhishek_0> mal i dont know .. the last working build was using GST-OMX ..15:37
mal@abhishek_0 check the droidmedia instructions here and see if you did it correctly
T4<abhishek_0> mal yes i followed the instructions correctly15:44
malso did you need to 64-bit type build?15:45
T4<abhishek_0> no , device is 32 bit only15:46
T4<abhishek_0> well .. the soc is 64bit .. but it doesnt matter .. i guess15:47
T4<abhishek_0> *64bit capable15:49
tom13 815:50
mal@abhishek_0 do you have the define or not? did it build 32-bit libs?15:51
malalso check whether you did some unnecessary changes to init.rc15:52
T4<abhishek_0> mal not it is not defined..  … but FORCE_32_BIT := true is .. (i hope it doesnt matter)16:00
T4<abhishek_0> i did patched init.rc as instructed in 13.2.2 hadk pdf16:01
T4<abhishek_0> *patch16:01
malthat should not be done for hybris-14.1 base16:04
malrevert the change16:04
T4<abhishek_0> yeah already did16:05
malanyway you need to the get the 3 mini* services running16:05
T4<abhishek_0> minimedia minisf and minisfservice16:08
T4<abhishek_0> *miniaf16:09
lolekr0kk3rz for that repo update, how to do this?16:10
lolekis there any guide?16:10
loleksome general one?16:10
malI'm pretty sure you need miniafservice also, and the other two are minimediaservice and minisfservice16:12
mal@abhishek_0 ^16:13
malghosalmartin: we noticed you had permissions to xperia x OBS project, are you maintaining it anymore?16:14
ghosalmartinmal: not really I cant really test on my device atm since its daily driver16:14
lolekghosalmartin: I can make a test on my x16:15
ghosalmartinam more than happy to maintain it and stick an image on devaamo if someone will test n feedback16:15
T4<abhishek_0> dammit .. what is wrong .. all the 3 services start properly .. according journcalctl and dmesg16:17
lolekghosalmartin: I said that I have Xperia X which is laying around bought it only to test sailfish16:17
vknecht@abhishek_0, didn't you need to disable qseecomd ?16:18
ghosalmartinill knock up a build tonight then16:18
ghosalmartinsee what the state of affairs is16:18
vknechtiirc timed_daemon can be disabled too16:18
lolekghosalmartin: which os version will it be then?16:19
lolekghosalmartin: 2.2.x?16:19
ghosalmartindunno if thats on obs16:19
lolekthen which one is?16:20
lolekor how to check this?16:20
vknechtit's 2.2, yes16:20
malghosalmartin: 2.2 is latest on OBS16:20
lolekthen I'm waiting for the image16:20
lolekjust poke me tomorrow16:21
malghosalmartin: remember to remove the hardcoded version from devel meta16:21
ghosalmartinmal: will do16:21
*** lourelis is now known as postre16:22
*** postre is now known as romater16:24
*** romater is now known as romaterTB16:24
*** romaterTB is now known as postre16:24
T4<abhishek_0> lol16:32
mal@abhishek_0 do you have graphics performance fix?16:37
T4<abhishek_0> mal yes . buffer count is 516:40
malbuffer count is 5? you mean idle time?16:42
Mister_Magistermal: i bet he mean buffer count16:44
T4<abhishek_0> buffer count was actually 5  idk for some reason..  putting idle time value to 5 .. shows some improvements16:47
r0kk3rzbecause you set it to 5 maybe? just a guess16:56
tom13anyone here using xt894 adaptation17:22
lintuxidoHello Porters...!!!17:29
lintuxidois it mandatory to rebuild libhybris while updatating to ?17:30
lintuxidoI am getting an error while updating libhybris, line 41: ./configure: Permission denied17:31
lintuxidofull log at
T4<abhishek_0> lintuxido rm -rf hybris/mw/libhybris17:33
malalso make sure dhd submodule is new enough17:34
lintuxidothanks abhishek_0 will try it, yes mal I have updated it17:34
T4<abhishek_0> even the strace of minimedia looks crazy
tom13I would prefer the new version reactivate screen on keyboard buttonpress17:48
malwhat is crazy in that?17:48
T4<abhishek_0> way too big to be analyzed   ... :P18:06
malwell the last lines look interesting, it's waiting for some service, but that should be provided in droidmedia I think18:07
T4<abhishek_0> it is sensorfw18:07
T4<abhishek_0> and loops at it18:08
r0kk3rzsensorservice != sensorfw18:08
r0kk3rzdo the sensors work? it sounds like they arent18:10
T4<abhishek_0> umm .. flash light doesnt work //confirmed18:10
malr0kk3rz: I think that should be related to this
T4<abhishek_0> proximity works //confirmed18:13
T4<abhishek_0> and so does g sensor18:13
malthat has nothing to do with actual sensors18:15
r0kk3rzabhishek: you did pull the latest droidmedia yeah?18:23
T4<abhishek_0> i built gtreamer and pa module droid glue .. like 7-8 hours ago18:26
T4<abhishek_0> so i guess yeah .. it was latest18:26
r0kk3rzdont guess, check :P18:29
r0kk3rzand droidmedia isnt gstreamer18:31
T4<abhishek_0> From git:// …  * branch            master     -> FETCH_HEAD … Already up to date. … r0kk3rz18:34
*** lintuxido_ is now known as lintuxido18:57
*** lintuxido_ is now known as lintuxido19:03
*** Jonni_ is now known as Jonni19:09
vknechthow can one follow what /usr/sbin/flash-partition ? Running it by hand ? I'm trying to find why OTA doesn't update the kernel (the rest is ok)19:10
vknecht*what /usr/sbin/flash-partition is doing19:10
Nokius_r0kk3rz: I don't19:13
Nokius_r0kk3rz: there is no official twrp for the scorpion just for the windy19:14
*** Nokius_ is now known as Nokius19:14
Nokiusr0kk3rz: wait it should be nokius_19:18
r0kk3rzreally? oh ok then19:19
lintuxidoFinally updated my Moto G4 Plus to SFOS- :)19:46
Mister_Magisterlintuxido: thanks for keeping my g line up-to-date19:48
Mister_Magisterlintuxido: g3 gets last testing and will be released today probably g2 will be tested tomorrow and will be released along with g2 lte19:49
Mister_Magisterand g is dead19:49
lintuxidoMister_Magister: even I have created one more build using lineageOS base 14.119:50
Mister_Magisterone more build for what?19:50
lintuxidoI have 2 virtual machines for my port. 1st is using base 13.0 and 2nd is using base 14.1 :)19:51
Mister_Magisterwhy do you have vms and why 2 for thaty19:52
Mister_Magisterand why 2 ports19:52
lintuxidojust trying 2nd build when I was unable to figure out bootloop19:52
lintuxidofor 13.019:53
Mister_Magisterwhatever keep my g line up to date please :P19:53
Mister_Magistermaybe ill grab g4 play  (or how is called second g4)19:53
Mister_Magistermal: what base is this
lintuxidogr8, G5 Plus will also be good option.19:55
Mister_Magister i would first buy moto g19:55
Mister_Magisterand moto e (all three)19:55
Mister_Magisterand first of all moto x style19:55
malMister_Magister: fairphone aosp6 based19:55
Mister_Magisterto finish up my collection19:55
Mister_Magistermal: thanks19:55
Mister_Magisteraosp6 = lineage 13 right?19:56
Mister_Magisterso this should apply to this
malmaybe, how about you just search for the commits in the git history?19:57
Mister_Magisteri just wanted to talk :( make sure and stuff19:57
Mister_Magisterdont hit me19:57
Mister_Magistermal: hmmm i cant fork mer-hybris/android_frameworks_av :D gotta look in git log instead20:06
malwhy not?20:14
Mister_Magisteri have fork of some htc repo that is fork of cm repo and mer-hybris repo is fork of cm repo aswell20:20
Mister_Magisterso i cant fork it 2 times20:20
vknechtwhen uploading newer droid-hal-$DEVICE rpms on OBS, should I modify Source0 in the .spec file to match, or is it supposed to be automatic ?20:27
Nokiusr0kk3rz: why did you ask?20:28
wdehooghi. I have built 2.2 for bacon. most stuff worked but sensors did not.20:28
wdehoogwhen I reverted sensorfw-qt5 to 0.9.7-1.4.1 the worked again20:29
wdehoogwith 0.10.0-1.11.2 I need to add a config file and then it also works20:29
wdehoogquestion: what should I do use the 0.9.7 from jolla repo or the new one from the community repo?20:30
* vknecht finds his question in logs, asked by himself... :-) 20:34
vknechtthanks mal XD20:34
Mister_Magistervknecht: i had that often20:35
Mister_Magistervknecht: but its worst when you see yourself asking this problem then nobody answers you and you know you fixed it afterall but dont know what you in past did20:36
r0kk3rzwdehoog: keep at 0.9.7, since it looks like 0.10 is for 2.2.120:41
Mister_Magistermal: after reverting commits in frameworks/av what im supposed to rebuild?20:41
wdehoogr0kk3rz: thanks20:41
malMister_Magister: hybris-hal obviously20:45
Mister_Magisterso only droid-hal?20:45
malshould be enough20:45
Mister_Magisterfixing some last rejects20:46
wdehoogr0kk3rz: sorry next question: do you happen to know how to make sure a specific version of a package is installed?20:55
piggzeek, i fix one thing and break another!20:55
piggznever seen this before ... the event view isnt working!20:55
piggzit just, fades a bit darker20:56
piggzdisplayes nothing!20:56
r0kk3rzwdehoog: where are you pulling in the updated package?20:56
malwdehoog: make sure the version number is bigger20:56
wdehoogr0kk3rz: you are right. its from my own obs. silly me.20:57
wdehoogmal: I wanted to force 0.9.7 while 0.10.0 is also available. is such a thing possible?20:59
piggzhuh, restarting the homescrren from utilities fixed it20:59
malwdehoog: where does the 0.10.0 come from?21:00
piggzthere we go, mido has 2,2, kernel upgrade to 3.18.105 and all seems to be working21:01
wdehoogmal: somehow  sensorfw-qt5 has always been in the bacon obs21:01
malwdehoog: well it for some odd reason builds both packages, which usually not done21:02
malwdehoog: normally only the hybris package is built there, so that is matches the main package in version, at least quite close21:03
wdehoogmal: you have HEAD in the fp2 service file. but HEAD is now 0.10 isn;t it?21:03
malwdehoog: if you look here it's still 0.9.4
malwdehoog: I just haven't triggered a update of that in a long time21:04
wdehoogmal: yes I saw. and I do not understand why HEAD would build 0.9.721:04
wdehoogaha. in bacon there is a webhook.21:05
malwdehoog: if you want to make sure you hve some version then just add a suitable hash to revision in service21:05
malwdehoog: also maybe remove the normal sensorfw completely21:05
malwdehoog: why does that even have statefs also?21:06
wdehoogmal: the 'normal' ? I only see sensorfw-qt521:06
malwdehoog: only build sensorfw-qt5-hybris21:07
wdehoogmal: ok. will do21:07
malwdehoog: also you should not have libgrilio there21:07
wdehoogmal: you meant statefs-providers? small patch for battery full21:07
wdehoogmal: i'll remove it. thanks21:07
malwdehoog: but that is from mer-core?21:08
malwdehoog: what version of statefs do you need?21:08
wdehoogmal: and that is wrong in any way?21:08
malwdehoog: my fp2 has statefs 0.3.17 which is what you have built now21:10
wdehoogmal: there is a patch: provider_power_udev.patch to detect full otherwise it kept saying charging and not trigger the full led21:10
piggzany chance of publishing source for sailfish-fpd-slave-f5121?21:10
Mister_Magisterpiggz: opensourcing fingerprint?21:10
piggzMister_Magister: the device specific part ... the rest is available21:12
Mister_Magisterpiggz: oh really?21:12
Mister_Magisterabranson: said its closedsource21:12
piggzwell, it may be closed, but the pacakges can be installed21:12
Mister_Magisterso we can use fingerprint software on our ports21:13
Mister_Magisterjust nobody knows how21:13
Mister_Magisterbecuase device specific package is closed21:13
piggzwe need to find out whats in the device specific part21:13
tom13what does flashing yellow LED mean ?23:28
tom13nvm i think this is it
tom13handset wont respond tho23:29
tom13needed to cycle power23:31
tom13steady red23:31

Generated by 2.17.1 by Marius Gedminas - find it at!