Wednesday, 2018-10-31

*** ChanServ sets mode: +v T402:57
*** ChanServ sets mode: +v T408:52
*** phdeswer_ is now known as phdeswer09:22
lintuxidoHello Porters...11:24
lintuxidocan anybody provide the guidelines for gitlab ci integration?11:25
r0kk3rzwhat do you want to know?11:27
lintuxidor0kk3rz: I want to use gitlab for sfos image creation11:27
lintuxidois it like OBS? or something different?11:28
r0kk3rzit uses obs11:28
r0kk3rzso you need to have your adaptation on OBS first11:28
lintuxidoOk, I have my adaptation on OBS, but I am not using it for building sfos zip yet, so I have to fix some issue in OBS then I able to use it..11:31
r0kk3rzwhats the issue?11:31
lintuxidothat time I switched to minimal hooks for libhybris, now I am not using it, so need to check it.11:32
malanyone else have issues logging in to OBS?11:33
r0kk3rzyeah just put the libhybris branch back to master11:33
malok, it was only a temporary issue11:34
r0kk3rzmal: logs in for me11:34
mallintuxido: you seem to have some project which use old nemo:devel:common targets as dependencies, could you fix those? in home:lintuxido the targets sailfishos_2.1.0.11 and sailfishos_2.1.1.2411:35
lintuxidomal:yes, will now focus on OBS and fix it.11:36
lintuxidoAlso I want an opinion from channel, should I use new base like los 14.1 or keep old base los 13.1 for my porting? I built sfos my device using both bases but both bases have some bugs11:37
r0kk3rzuse whichever base works best for that device11:38
lintuxidor0kk3rz: but los 13 is unofficial and discontinued where los 14.1 is official and still live.11:40
lintuxidor0kk3rz: for athene11:40
r0kk3rzthe choice is yours to make11:42
lintuxidoone more thing I want to understand that when I built halium port I was able to boot plasma mobile successfully and when I built sfos using same kernel configs its showing missing for every option in lxc-checkconfig, will be glad to know where I made a mistake.11:45
r0kk3rzyou sure its using the same config?11:47
lintuxidor0kk3rz: yes, I used same.11:48
r0kk3rzand you checked the config in the out folder?11:48
r0kk3rzor in /proc/config.gz on the device11:48
*** ChanServ sets mode: +v T411:50
lintuxidor0kk3rz: cross checked it using halium kernel script, using -w option it configure it for halium.port.11:50
r0kk3rzthat wasnt the question11:51
lintuxidor0kk3rz: m checking in mentioned location.11:51
T4<abhishek_0> wuut?11:56
lintuxidor0kk3rz: you are right, I think that kernel defconfig changes is not there.11:59
r0kk3rzcheck your defconfig for duplicates11:59
r0kk3rzno idea what that halium thing does12:00
r0kk3rzid normally just change the config by hand12:00
lintuxidor0kk3rz: so should I delete out directory and build again ? will it work?12:00
r0kk3rzdid you check the config file?12:00
lintuxidoyes, I compared both, here they are -->
r0kk3rzwhy are you diffing them?12:03
lintuxidoI thought defconfig parameters added in .config while building it12:05
r0kk3rzthey are12:05
r0kk3rzbut look in the config in the source tree12:05
T4<abhishek_0> r0kk3rz halium uses the same mer-kernel checker for hybris-boot12:05
T4<abhishek_0> and we too fix them by hand12:06
Mister_Magisterubuntu has script for doing that automatically xD12:08
lintuxidoMister_Magister: yes I tried that script also using -w option12:08
lintuxidoanyways, will check it in future, now please tell me if I want to revert HADK- 13.2 and 13.3 adaptation from my build then what should I do? Is it ok to delete out directory or something else?12:14
r0kk3rzout folder just has build outputs12:37
T4<abhishek_0> Mister_Magister halium-boot uses a -w tag for fixing defconfig, but thats only for ubuntu, why is lintuxido using it here ?12:47
Mister_Magisterhow do i know12:47
T4<adampigg> Kimmoli (or anyone) tohkbd allows alt-tab app can i enablw that with a generic bt keyboard?13:21
r0kk3rzisnt that done with a service?13:22
kimmolithat is tohkbd user daemon13:42
T4<adampigg> Rokk3rz, dunno13:44
kimmoliyou cant use it directly atleast, it is capturing alt-tab before it is passed to uinput13:48
*** ChanServ sets mode: +v T414:16
vknechtspiiroin, fantastic :-) thanks !
spiiroinvknecht: nice ;-)14:45
spiiroinvknecht: hmm.. I would have expected the "KEY_00fb" & "KEY_WEIBO" to drop out altogether. I wonder those keycodes were registered in multiple places?14:47
Mister_Magisterspiiroin: sorry i forgot to test your pr14:49
Mister_Magisteri lost it in logs14:49
spiiroinMister_Magister: np, it evolved quite a bit after I asked and is merged now - so we'll know sooner or later if it helps in your case too14:50
Mister_Magisterspiiroin: previous one already helped14:51
Mister_Magisterspiiroin: there is problem with freezing proximity sensor that you are probably aware of already14:51
spiiroinMister_Magister: what device?14:51
Mister_Magisterspiiroin: couple14:52
spiiroinoh that, yes14:52
Mister_Magistermoto g2, moto g2 lte, moto x play, moto g314:52
Mister_Magisterspiiroin: any hope of fixing it?14:52
Mister_Magistermy mom is pissed off by it14:52
Mister_Magisterso i disabled it for her14:52
spiiroinwell, 1st need to figure out what it is.14:53
spiiroinMister_Magister: any of those devices use sysfs enable/disable? instead of / in addition to android hal?14:54
Mister_Magisterspiiroin: i dont quite get what you mean14:54
spiiroinsensorfwd optionally can toggle sysfs files to enable/disable sensor14:55
spiiroinwhen that is applied was changed, without me having a device where to test it14:55
spiiroinif there are some /sys/xxx paths defined in config files under /etc/sensorfw/ -> might be related to that14:57
Mister_Magisterspiiroin: they are working out of the box so14:57
Mister_Magisterspiiroin: i dont know14:59
spiiroinMister_Magister: "find /etc/sensorfw/ -type f|xargs grep /sys" if only device_poll_file_path -line shows up -> not that sysfs enable thing15:01
Mister_Magisterspiiroin: will do but later15:01
T4<adampigg> kimmoli, so i have to steal it and write my /own service?15:40
vknechtspiiroin, nice hat, yes :-) don't know about registration, the KEY_WEIBO doesn't seem to appear anymore15:42
vknechtnow it works fine in LOS too15:42
vknechtspiiroin, so for proximity, one can choose between sysfs and HAL ? I might want to force HAL way...15:46
T4<adampigg> kimmoli, so i see you have your own task switcher implementation. id need to copy that, and somehow get the ke event, /which i guess is hard in wayland16:14
T4<adampigg> i guess lipstick handles the home key event, ideally it would be the same way16:14
spiiroinvknecht: more like one can choose (somehow via config) between: a) evdev events + sysfs ctrl b) hal events and ctrl, but ...16:23
spiirointhe (b) can be instructed to do sysfs writes in addition to hal control16:23
spiiroinnot sure where it is/would be needed -  and I did fiddle with the code fairly recently -> possible breakage point in there16:24
vknechtthe ps-sensor seems to send spurious near/far events, so if there's another way to poll it, I'd like to try ; esp. since I had to do a hal wrapper in LOS to fix the fact it was detected as non-wakeup sensor16:27
Mister_MagisterWondering if xperia xa2 has roma bt chip16:28
vknechtbut I read in logs that you said it could be to aging sensor ?16:28
vknecht*be due to16:28
malMister_Magister: cherokee chip, which is very similar to rome chips16:31
vknechttoo bad I forgot to lower/cut the doorbell...16:34
malMister_Magister: bluetooth can work in android 8 devices (which have binderized bluetooth) even on devices with rome chip, not sure how we can easily fix the devices with lower android base16:37
spiiroinvknecht: wear and tear (i.e. scratches on glass over sensor etc) change what kind of attenuation als gets / base reflection ps sees -> they will get worse over time16:40
spiiroinif recalibration is possible, it might help to some extent16:40
spiiroinbut then there are also the usual and not so usual sw bugs ...16:41
vknechtok, will have to check all the fleet ;-) iirc it happens with the newer one too16:44
T4<adampigg> porters will be itching for lbt to make 3 available17:29
r0kk3rzits an imposter 3 anyway17:30
malno target in the json file yet17:30
T4<adampigg> r0kk3rz, mre like 2.3? ;)17:32
T4<adampigg> they need to sort out the qt 5.9 situation17:33
T4<adampigg> and help out porters with fingerprint sensors17:34
T4<adampigg> imo17:34
r0kk3rzyeah 2.317:34
T4<adampigg> so, im thinking a daemon could read direct from evdev to get the alt-tab key, that way wayland security wouldnt get in the way17:35
r0kk3rzhome key gets to home, which isnt so bad17:36
T4<adampigg> sure, but as tokdb can do it, i reckon i can too17:36
T4<adampigg> its the fact u have to press home, then touch th screen17:37
r0kk3rzyeah, need to get glacier tablet ui going17:37
T4<adampigg> nearly as laptop-like as an ipad-pro17:38
T4<adampigg> actually, its already way more laptop like17:39
vknechthmm, that notification reminds me we really need an ota checker for ports... don't we ? :-)17:45
malI had a parially working one already, just never finished ittt17:51
ThaodanMister_Magister: something  similar cherokee18:30
*** ChanServ sets mode: +v T420:40
ghosalmartinso sfos 3.0 :P20:50
ghosalmartinhas t4h browser been upgraded?20:50
TheKitghosalmartin, still Gecko 3820:55
r0kk3rzits a little anti-climactic20:57
ghosalmartinjust a tad20:57
ghosalmartinwas the android lae r20:57
ghosalmartinlayer update in it?20:57
ghosalmartin*sigh* on we go :P21:01
Slaxxerfork it21:10

Generated by 2.17.1 by Marius Gedminas - find it at!