| mautzone | mal: This was because my port was unmaintained since last year, broken phone and lots of other work to do. | 00:01 |
|---|---|---|
| mal | ok | 00:01 |
| mautzone | mal: Switched to nemo:testing:hw:common. | 00:07 |
| mal | mautzone: thanks | 00:07 |
| mal | mautzone: if you use latest target the devel common is ok, just the versioned targets should be testing | 00:09 |
| mautzone | mal: Ok, now i understand, thanks! | 00:10 |
| mal | mautzone: like here https://build.merproject.org/project/meta/nemo:devel:hw:fairphone:fp2-sibon | 00:10 |
| mal | the 3.0.0.8 is there just because it's not latest yet (latest is still 2.2.1.18) | 00:11 |
| mautzone | mal: latest target is the latest released SDK? http://releases.sailfishos.org/sdk/latest/targets/targets.json | 00:12 |
| mal | mautzone: yes | 00:12 |
| mautzone | mal: :) | 00:12 |
| mal | so probably next week we'll get 3.0.0.8 as latest | 00:12 |
| mautzone | mal: Any mayor changes needed for 3.0.0.8? | 00:14 |
| mal | no | 00:14 |
| mal | I built it without any changes to config repo | 00:15 |
| mautzone | mal: :) | 00:18 |
| mautzone | mal: Would it be a good idea to switch to a newer base than cm13? | 00:18 |
| mal | mautzone: my version of the sensor fix work? | 00:19 |
| mautzone | mal: Building right now. | 00:20 |
| mal | mautzone: 14.1 shouldn't need reverting the commits, otherwise there isn't much difference, depends on how well 14.1 works on the device | 00:20 |
| mautzone | mal: Don't know, i've never used Android ont Nexus5, but i think it's good supported. | 00:21 |
| mal | 13.0 is usually not maintained anymore on most devices | 00:21 |
| mal | 14.1 can still be | 00:21 |
| mautzone | mal: But one will not get into trouble from the sailfish side, when using old bases like 12.1 or 13? | 00:22 |
| mal | mautzone: did you previously edit /system partition directly to fix sensors? just remember to revert the changes there | 00:22 |
| mautzone | mal: I reverted my commit. | 00:23 |
| mal | mautzone: no issues from sailfish point of view, just might miss some android side security fixes or something | 00:23 |
| mal | mautzone: I meant that how did you test it on device? /system is read-only | 00:23 |
| mautzone | mal: I thought i put the symlink there on my test installation. | 00:25 |
| mal | ok, so you remounted /system probably | 00:25 |
| mautzone | mal: Must be. | 00:26 |
| mal | just to be sure when testing check that the symlink is not there in /system | 00:27 |
| *** ChanServ sets mode: +v T4 | 02:40 | |
| T4 | <adampigg> Kimmoli, all binaries for camera are in devel:xiaomi:mido obs, inc app | 06:53 |
| T4 | <adampigg> r0kk3rz, how to switch tab? | 07:58 |
| *** ChanServ sets mode: +v T4 | 08:06 | |
| r0kk3rz | ctrl number | 08:09 |
| r0kk3rz | so ctrl+1 for first tab | 08:09 |
| T4 | <adampigg> nice, like it | 08:14 |
| _sven | any idea how to fix the missing submenues on gemini after enable landscape mode? | 08:25 |
| r0kk3rz | _sven: you might want to try that on gemini too, terminal with tabs! | 08:33 |
| _sven | yes, i will give it a try | 08:34 |
| r0kk3rz | _sven: https://build.merproject.org/package/show/home:r0kk3rz/literm | 08:35 |
| T4 | <adampigg> r0kk3rz, app switcing and tabbed terminal, truly living the dream now | 08:45 |
| r0kk3rz | @adampigg yeah we should get some people with geminis to try | 08:46 |
| _sven | r0kk3rz: literm works like a charm, perfect. | 08:53 |
| r0kk3rz | _sven: you got the tabs to work? | 08:54 |
| _sven | r0kk3rz: yes ctrl+t new tab and change tabs with ctrl+1... | 08:56 |
| r0kk3rz | excellent | 08:57 |
| _sven | r0kk3rz: any trick to going back to tab 11...? | 09:00 |
| _sven | i can create new tabs but can only choose 1-0 (10) | 09:01 |
| r0kk3rz | i think thats the max | 09:05 |
| r0kk3rz | maybe | 09:05 |
| r0kk3rz | i could put in shortcuts to go to current tab + 1 i suppose | 09:05 |
| _sven | r0kk3rz: the tabs are bound to keys rather than numbers? | 09:19 |
| r0kk3rz | yeah maybe | 09:22 |
| r0kk3rz | codes there if you want to hack around of course | 09:23 |
| *** mgrover is now known as ghosalmartin | 09:23 | |
| T4 | <adampigg> r0kk3rz, close current tab? | 12:35 |
| r0kk3rz | ctrl+w, but it doesnt work | 12:48 |
| r0kk3rz | :) | 12:48 |
| akhil_surabhi | Hello, I'm trying to build droidmedia and my device needs audio policy service hack | 13:12 |
| akhil_surabhi | But, after adding it, droidmedia won't build | 13:12 |
| akhil_surabhi | It says "libxml2_intermediates/export_includes" missing, which is needed by "libaudiopolicymanagerdefault_intermediates/import_includes" | 13:14 |
| akhil_surabhi | No rule to make it | 13:14 |
| *** xvnvx is now known as alphabeta | 13:15 | |
| akhil_surabhi | Device: kenzo, base: cm-14.1 | 13:16 |
| mal | akhil_surabhi: is libxml enabled in manifest? | 13:42 |
| mal | if not then uncomment it and repo sync that repo | 13:42 |
| akhil_surabhi | mal: it was commented out, fixed that. Thank you | 13:43 |
| mal | akhil_surabhi: make a PR to the mer-hybris/android manifest so others won't have the same problem | 13:45 |
| akhil_surabhi | Mal: sure | 13:45 |
| steeeve_ | im tryin to build with url in ks and i get error 'Unable to find pattern: Jolla Configuration a5ultexx' You know why? | 13:52 |
| r0kk3rz | steeeve_: maybe we need to ping lbt to patternise that repo | 13:53 |
| steeeve_ | ahhhh | 13:53 |
| steeeve_ | lbt:sup? | 13:54 |
| mal | steeeve_: usually it's better to mentioned accurately what you want, in this case that you want a repo to be patternized and of course tell which repo | 13:55 |
| steeeve_ | ah, ok | 13:55 |
| mal | so he doesn't have to look in backlog what it refers to | 13:55 |
| steeeve_ | lbt: can you patternize samsung:a5ultexx repo please? | 13:55 |
| steeeve_ | that guy is the chief of obs? | 13:58 |
| lbt | done | 14:01 |
| * lbt takes off chief hat :D | 14:01 | |
| steeeve_ | aww, thanks my friend | 14:03 |
| steeeve_ | still having Unable to find pattern: Jolla Configuration a5ultexx error :/ | 14:04 |
| mal | steeeve_: trigger rebuild of config package on OBS | 14:07 |
| mal | for example edit the _service | 14:07 |
| steeeve_ | only config? | 14:07 |
| r0kk3rz | steeeve_: chief? more like grand wizard | 14:08 |
| steeeve_ | anyway, did you know that i you open _service and save it without modifying it it triggers rebuild? | 14:08 |
| steeeve_ | r0kk3rz: king of the obs? | 14:09 |
| r0kk3rz | the messiah of the obs | 14:09 |
| steeeve_ | hacker n2 | 14:09 |
| steeeve_ | hacker n1 is piggz :P | 14:09 |
| *** ChanServ sets mode: +v T4 | 14:10 | |
| T4 | <adampigg> mal, so i got some users to try/pgz-o-vision, and it didnt work | 14:11 |
| T4 | <adampigg> their properties are not listing exposure modes or iso modes!!!!! | 14:12 |
| T4 | <adampigg> wtf | 14:12 |
| r0kk3rz | mido exclusive ;) | 14:12 |
| T4 | <adampigg> they have mido .... piggz mido exclusive! | 14:13 |
| steeeve_ | i still have that error | 14:13 |
| T4 | <adampigg> you would :D | 14:13 |
| T4 | <adampigg> you havnt got the right plugins-bad-devel/pacakge :) | 14:14 |
| steeeve_ | adampiggz just revert that xD | 14:14 |
| T4 | <adampigg> no going /back/ now, full steam ahead to the future of sailfish cameras | 14:16 |
| r0kk3rz | steeeve_: you know you can choose to build an older version of gst-droid | 14:17 |
| steeeve_ | r0kk3rz: no, that would be pure hacky | 14:18 |
| r0kk3rz | lol. | 14:18 |
| r0kk3rz | you have a really weird idea of what is hacky | 14:18 |
| steeeve_ | dude, i have 2 patches to fix audio during calls and fm to apply everytime i update 16.0 tree because of stock hal. Trust me, i know what hacky is | 14:20 |
| steeeve_ | and i dont want to have a similar thing for sailfish | 14:21 |
| r0kk3rz | its quite normal for us to have to do such things because the git repos have newer middleware than the current version of sailfish works with | 14:22 |
| mal | @adampigg I built the version from yesterday and it worked on fp2 | 14:23 |
| mal | steeeve_: did you check which version of the plugin you now have installed on target | 14:23 |
| mal | using the command I gave yesterday | 14:23 |
| T4 | <adampigg> mal great, just need to figur out why their properties are different | 14:24 |
| mal | @adampigg not sure if I have all of the dynamic stuff in there yet | 14:24 |
| steeeve_ | mal: no, but it builds, so, it's the newest one. Also, since now i have obs, i wont build anything anymore, except if i need to test things | 14:24 |
| mal | steeeve_: you just said a moment ago that you still have the error, so which one is it, error or no error? | 14:25 |
| steeeve_ | now everything is fixed :P | 14:25 |
| mal | so what did you do? | 14:25 |
| steeeve_ | it's building the release | 14:26 |
| steeeve_ | mal: rebuild configs again | 14:26 |
| mal | I meant the local build | 14:26 |
| mal | which you had problems yesterday | 14:26 |
| steeeve_ | the local build builds as well | 14:26 |
| steeeve_ | yesterday i said i got it built | 14:26 |
| steeeve_ | [22:04] <steeeve> It got build thank esketit | 14:27 |
| steeeve_ | after i finish the build where do i have to upload it? | 14:39 |
| T4 | <abhishek_0> Oh hi steeeve !:) | 15:21 |
| steeeve_ | hi sir! | 15:22 |
| T4 | <abhishek_0> steeeve you can also be part of our gitlab-ci party , build flashable zips automatically | 15:22 |
| T4 | <abhishek_0> Still porting for that letv ? | 15:22 |
| steeeve_ | yees | 15:24 |
| T4 | <abhishek_0> Wow it is still is still not complete yet ? :P | 15:31 |
| T4 | <abhishek_0> Fuck my keyboard | 15:38 |
| T4 | <abhishek_0> *wow it is still not complete yet ? | 15:39 |
| steeeve_ | eh? | 15:39 |
| r0kk3rz | @abhishek_0 keep what you do with your keyboard to yourself please, thats just TMI | 15:39 |
| T4 | <abhishek_0> Wait what? | 15:40 |
| steeeve_ | how to do the pro ota builds? | 15:40 |
| mal | @abhishek_0 no swearing here | 15:41 |
| T4 | <abhishek_0> Ooo i didn't knew about that mal | 15:42 |
| akhil_surabhi | mal: droidmedia and droid-hal-kenzo both are creating the libdroidmedia.so and libminisf.so | 16:12 |
| akhil_surabhi | Did anything changed recently? | 16:12 |
| akhil_surabhi | They are conflicting | 16:12 |
| mal | akhil_surabhi: you forgot to repackage droidmedia before running build_packages.sh | 16:20 |
| akhil_surabhi | Okay | 16:21 |
| mal | akhil_surabhi: if you rebuild droidmedia stuff you always need to repackage them, otherwise those end up in droid-hal | 16:22 |
| akhil_surabhi | Okay | 16:23 |
| akhil_surabhi | Thank you | 16:23 |
| steeeve_ | r0kk3rz: can you help me with that ota thing plz? | 16:35 |
| r0kk3rz | maybe | 16:35 |
| r0kk3rz | whats your major malfunction? | 16:36 |
| steeeve_ | everything | 16:37 |
| steeeve_ | ive added that things in my device repos. other things seems impossible | 16:37 |
| steeeve_ | thosee* | 16:37 |
| locusf | being a disgustin fatbody? | 16:37 |
| steeeve_ | ? | 16:38 |
| r0kk3rz | seems impossible | 16:39 |
| r0kk3rz | ? | 16:39 |
| locusf | kids these days ... | 16:39 |
| steeeve_ | yes they seem impossible and i need a testing repo | 16:39 |
| r0kk3rz | locusf: ikr | 16:39 |
| r0kk3rz | steeeve_: you dont need a testing repo to try out an OTA | 16:39 |
| r0kk3rz | steeeve_: what seems impossible... | 16:40 |
| steeeve_ | it's in the guide | 16:40 |
| T4 | <adampigg> steeeve_ ota is hacks ontop of hacks, stay clear | 16:40 |
| steeeve_ | sem | 16:40 |
| r0kk3rz | testing and devel are functionally equivalent | 16:40 |
| steeeve_ | hmm | 16:40 |
| r0kk3rz | so what have you done already | 16:41 |
| steeeve_ | the things in my repos | 16:41 |
| r0kk3rz | be specific | 16:41 |
| r0kk3rz | 'ive done the things!' tells me precisely zero things | 16:42 |
| T4 | <adampigg> all the things! | 16:42 |
| steeeve_ | https://wiki.merproject.org/wiki/Adaptations/faq-hadk#Over-the-Air_updates_.28OTA.29: everything here until "Get maintainership..." | 16:42 |
| locusf | ask clear and concise questions with details, get clear detailed, clear and concise answers | 16:43 |
| locusf | very simple | 16:43 |
| r0kk3rz | steeeve_: so you cant summarise? i have to guess what you've done? | 16:43 |
| steeeve_ | r0kk3rz: there are some things to add in you droid-configs to support otas, right? well, ive done all of them | 16:44 |
| r0kk3rz | the things wilson, ive done the thiiings! | 16:45 |
| steeeve_ | thosee. i couldnt say it better | 16:45 |
| locusf | r0kk3rz: WHAT YEAR IS IT? | 16:46 |
| r0kk3rz | steeeve_: so what, exactly, is your problem? | 16:46 |
| vknecht | so, it seems https://build.merproject.org/project/monitor/nemo:devel:hw:samsung:a5ultexx and did you build an image from it ? does it work ? then did you make a change to test OTA ? did it work ? | 16:47 |
| T4 | <adampigg> needs maintainership? | 16:47 |
| steeeve_ | r0kk3rz: the osc | 16:47 |
| r0kk3rz | vknecht: dont start with the guessing game, if steeeve_ cant communicate thats his problem :P | 16:47 |
| steeeve_ | vknecht: yes, ive done everything in the obs building instructions | 16:48 |
| vknecht | all seems fine then, if OTA worked with devel... did it ? :) | 16:49 |
| steeeve_ | i didnt push any ota | 16:49 |
| vknecht | so that's the last step before you need a testing repo ; make some change to your droid-hal-$DEVICE, upload that to devel, then follow the manual OTA instructions | 16:51 |
| steeeve_ | but he said i dont need testing | 16:53 |
| vknecht | you'll need it once everything works in devel, because testing-based image are what you're supposed to distribute (and so you can use devel to prepare updates etc. without disturbing the users) | 16:56 |
| steeeve_ | but i want to disturb them | 16:57 |
| steeeve_ | if everything works | 16:57 |
| steeeve_ | but ok | 16:58 |
| steeeve_ | lbt: chief, can you add a testing repo for samsung a5ultexx, please? | 16:59 |
| T4 | <adampigg> in devel you are free to break your own device | 16:59 |
| T4 | <adampigg> and other users who take the risk | 16:59 |
| T4 | <adampigg> the idea is to try not to break testing | 16:59 |
| steeeve_ | i understand | 17:00 |
| steeeve_ | i dont want to start a kamikaze attack to all A5 devices | 17:00 |
| vknecht | so you should really test OTA with your devel, before going to testing | 17:01 |
| steeeve_ | i built an image | 17:02 |
| steeeve_ | zip* | 17:02 |
| steeeve_ | do i have to publish it? | 17:02 |
| vknecht | not really | 17:03 |
| steeeve_ | good,so now i need the testing, right? | 17:03 |
| vknecht | you need to check that OTA works in devel "channel" first | 17:08 |
| vknecht | to see if the image you built can be updated from online repos | 17:08 |
| steeeve_ | hmm | 17:09 |
| vknecht | that implies that you upload newer droid-hal-$DEVICE with eg. newer kernel build, upload that to devel ; stuff gets rebuilt by OBS, then you can run the commands for OTA on device | 17:10 |
| vknecht | if it's okay, then you can ask for testing channel for your device, and do the package copy/promotion from devel to testing, then build an image from testing, and distribute that | 17:11 |
| steeeve_ | devel repo is ok | 17:14 |
| steeeve_ | everything builds and the built image is ok | 17:14 |
| vknecht | that's a good start :-) | 17:17 |
| steeeve_ | yessah | 17:18 |
| Umeaboy | Hi! | 17:35 |
| Umeaboy | I certainly don't mean to be or sound rude by asking, but would it be possible to have a easier-to-read HADK that works? Chapter 5.1 confuses me a bit. Is the git part supposed to be ran outide of the HABUILD_SDK? I have already setup git credentials, but the mkdir $ANDROID_ROOT/.repo/local_manifests isn't working. | 17:38 |
| Umeaboy | It would be nice to have a little bit more informative, but also more acurate HADK. | 17:40 |
| Umeaboy | Up til then everything works. | 17:40 |
| r0kk3rz | whats not working about it? | 17:41 |
| steeeve | Everything!! | 17:42 |
| Umeaboy | r0kk3rz: Page 12. | 17:43 |
| r0kk3rz | *sigh* not this again | 17:44 |
| r0kk3rz | Umeaboy: please explain what you've just done | 17:44 |
| Umeaboy | All of the steps until the 5.1 part. | 17:44 |
| r0kk3rz | and what happened | 17:45 |
| Umeaboy | Well as type to create the local_manifests directory I get this: mkdir: cannot create directory '/home/kristoffer/hadk/.repo/local_manifests': No such file or directory | 17:47 |
| mal | Umeaboy: how many times have you done hadk? and you still have problems? | 17:48 |
| mal | Umeaboy: you didn't do repo init first? | 17:48 |
| Umeaboy | I did. | 17:48 |
| Umeaboy | That worked. | 17:48 |
| mal | so is the .repo folder there? | 17:48 |
| Umeaboy | It's the creation of the local_manifests directory that's not working. | 17:49 |
| mal | permission issue? | 17:49 |
| Umeaboy | I went to https://source.android.com/setup/build/downloading#installing-repo and ran everything without a problem, but after initializing the repo I ran mkdir $ANDROID_ROOT/.repo/local_manifests and it still won't work. | 17:52 |
| mal | I find it amazing that you have complained about hadk pdf for months of years and still have issues, it's not really that difficult | 17:53 |
| mal | Umeaboy: like I said, check the .repo folder permissions | 17:53 |
| r0kk3rz | mkdir is quite straight forward, surely you can work it out | 17:53 |
| Umeaboy | drwxr-xr-x 7 kristoffer kristoffer 4096 Nov 12 17:51 repo | 17:53 |
| steeeve_ | he's tried to fix it for years? | 17:53 |
| Umeaboy | ls -l .repo/ | 17:54 |
| Umeaboy | Using an SDK isn't something I'm used to. | 17:54 |
| Umeaboy | But in order to get Sailfish running on my phone I have to do it myself. | 17:54 |
| mal | Umeaboy: just curious why are you doing this again, I'm pretty sure you have setup everyone many times before? | 17:55 |
| Umeaboy | Unless you know someone that owns the same phone as me. | 17:55 |
| Umeaboy | mal: Yeah, but sometimes I reinstall my host OS and that clears my HDD as well. Now I' | 17:55 |
| mal | Umeaboy: only other reason I can think of it that you messed up setting ANDROID_ROOT variable | 17:55 |
| Umeaboy | m using my desktop PC. | 17:56 |
| mal | Umeaboy: so you don't bother copying the data before reinstall? | 17:56 |
| mal | quite odd | 17:56 |
| Umeaboy | mal: Not for that purpose anyway. | 17:57 |
| Umeaboy | It would be a different situation if for example......the HDD was failing. | 17:57 |
| Umeaboy | Then I'd make a backup,. | 17:57 |
| Umeaboy | mal: As I said....... everything worked uptil then. | 18:02 |
| mal | Umeaboy: show echo $ANDROID_ROOT | 18:03 |
| Umeaboy | /home/kristoffer/hadk | 18:03 |
| mal | so only thing I can think of is that permissions are wrong run sudo chmod 777 .repo | 18:03 |
| Umeaboy | Nope. Still same result. | 18:04 |
| mal | how is that even possible | 18:04 |
| mal | go to the .repo folder and run mkdir there | 18:05 |
| Umeaboy | THAT worked. | 18:05 |
| mal | no idea what you did but it was somehow wrong | 18:06 |
| mal | maybe some hidden character in the command that broke it | 18:06 |
| Umeaboy | Syncing now. | 18:14 |
| kimmoli | does plain cd $ANDROID_ROOT work? | 18:20 |
| steeeve | If the variable is set correctly yes | 18:20 |
| steeeve | Why not? | 18:20 |
| steeeve | Test | 18:20 |
| kimmoli | i was asking from Umeaboy... or did you possibly copy from the pdf and got some carbage chars? | 18:22 |
| steeeve | From my experience, you can ctrlc ctrlv almost all commands from hadk about env setup | 18:23 |
| r0kk3rz | steeeve: but did you do the things? | 18:24 |
| steeeve | Obviously. The things come first :P | 18:24 |
| steeeve | I think if you ctrlc ctrlv all the commands and text files shown in hadk you will successfully build sailfishos for hammerhead | 18:25 |
| steeeve | Anyone can confirm? | 18:26 |
| kimmoli | dunno is the pdf fixied, but there was some strange formattings that broke copypaste. | 18:26 |
| steeeve | Hmm | 18:27 |
| steeeve_ | test | 18:27 |
| steeeve | I would suggest to remove ubuntu rootfs from hadk | 18:28 |
| steeeve | That thing is useless af! | 18:28 |
| r0kk3rz | would you now | 18:28 |
| steeeve | I would ._. | 18:28 |
| steeeve | Is there an ot group of sailfish? | 18:30 |
| steeeve | On freenode obviously | 18:31 |
| r0kk3rz | yeah you can take a dive into the trollbox | 18:33 |
| r0kk3rz | #jollafanclub | 18:33 |
| steeeve | Yo | 18:34 |
| T4 | <akaWolf> :D :D | 18:34 |
| steeeve | But there are only strangers in that channel :/ | 18:35 |
| steeeve | And it's +m as well | 18:35 |
| steeeve | (And i dont even have +v) | 18:36 |
| T4 | <akaWolf> Umeaboy ofc it can be written easier | 18:36 |
| T4 | <akaWolf> but need some resources | 18:36 |
| Umeaboy | I'd like to put the unnecessary information at the very bottom. | 18:36 |
| Umeaboy | At the last page. | 18:36 |
| Umeaboy | Like a resource info page. | 18:37 |
| r0kk3rz | steeeve: yeah its mostly the teletroll channel | 18:38 |
| steeeve | Mostly what? | 18:38 |
| steeeve | (Btw i got +v) | 18:38 |
| kimmoli | is that then steeevve ? | 18:41 |
| steeeve | kimmoli: whaat? | 18:41 |
| r0kk3rz | steeeve: the teletrolls, from trolologram | 18:41 |
| steeeve | Lol | 18:42 |
| steeeve | Btw i remember i got banned to some telegram fan club group some months ago | 18:42 |
| steeeve | Not a big loss anyway | 18:44 |
| r0kk3rz | might be the same one | 18:44 |
| steeeve | Yes, i dont think there are dozens of sailfish fan clubs *_* | 18:45 |
| r0kk3rz | otherwise theres #sailfishos and #jollamobile | 18:48 |
| r0kk3rz | the jolla one being the more general discussiony | 18:48 |
| steeeve | Nice | 18:55 |
| _sven | how can i fix the empty submenus on gemini after enabling landscape? I found out that if i use Topmenu longpress one of the settings, the submenu is present. Its only empty if i go to systemsettings/submenu. | 19:12 |
| T4 | Donreddy was added by: Donreddy | 19:16 |
| *** ChanServ sets mode: +v T4 | 20:05 | |
| krnlyng|mobile | who is working on huawei? | 20:15 |
| piggz | mal: so, i think with all this camera work, I have added features to my camera with a mod ... but i cant remember what ... my users dont have the same properties! | 21:18 |
| T4 | <akaWolf> @krnlyng|mobile [who is working on huawei?], Yesterday I talk with two chinese guys from Huawei in our office | 21:55 |
| T4 | <akaWolf> Today will be also | 21:56 |
| mal | piggz: what exatly are they missing? | 22:16 |
| piggz | mal: all the iso modes, and the new scene modes (hdr) | 22:16 |
| piggz | and im scratching my head now ... cant see what ive done | 22:16 |
| piggz | ive undone some build.prop changes and i still have everything | 22:17 |
| mal | I'll have to check tomorrow, it's quite late | 22:17 |
| piggz | stuff on forums points to enabling the camera2 api, but i dont think i have that enabled | 22:17 |
| piggz | mal: sure ... abranson is testing changes btw | 22:18 |
| mal | piggz: are those also using your port? | 22:18 |
| piggz | mal: yes, should all be using same packages from my devel repo | 22:18 |
| piggz | i got the properties from one of them... | 22:18 |
| piggz | https://bpaste.net/show/9e6d16265e5e | 22:19 |
| abranson | piggz: iso modes missing is definitely a HAL3 thing | 22:23 |
| abranson | you don't get those in the params if you're using HAL3 | 22:23 |
| mautzone | Hi! | 22:23 |
| mal | piggz: I'm building all of the latest packages now | 22:24 |
| mautzone | mal: Which base did yu use, when reverting these commits? https://github.com/mlehtima/android_frameworks_av/commits/hybris-fp2-m-sibon | 22:24 |
| mal | mautzone: fairphone provides their own aosp base | 22:25 |
| piggz | mautzone: dont stress about it tonight ... i dont think its a sailfish bug, think its a device issue | 22:25 |
| piggz | abranson: so ... if someone in jolla could do an icon for each scene and effect mode, that would be gr8 ;) | 22:25 |
| mautzone | mal: Sure, forgot about that. piggz: What do you mean? | 22:26 |
| r0kk3rz | piggz: make a list on github somewhere | 22:26 |
| piggz | abranson: and, as always, PRs accepted on camera app | 22:26 |
| mal | mautzone: I think meant to ping me | 22:27 |
| mal | +he | 22:27 |
| piggz | ah, aye | 22:28 |
| piggz | r0kk3rz: https://etherpad.net/p/jolla-camera | 22:28 |
| r0kk3rz | piggz: that doesnt look like github | 22:29 |
| piggz | r0kk3rz: its my camera scribble pad | 22:30 |
| piggz | itll do for now! | 22:30 |
| r0kk3rz | yeah, need to slam it into a github issue we can track progress on | 22:30 |
| piggz | spose | 22:30 |
| r0kk3rz | and i'll see if i can wrangle some icon designers | 22:31 |
| mal | I have an app that needs an icon but I'm bad at making those | 22:31 |
| piggz | r0kk3rz: https://github.com/piggz/harbour-advanced-camera/issues/3 | 22:34 |
| piggz | abranson: did you figure out HDR crash on xa2? | 22:37 |
| mal | piggz: I see all things in camera, iso, effects and scene modes | 22:38 |
| mal | piggz: does hdr crash on xa2? | 22:38 |
| piggz | mal: apparently | 22:38 |
| mal | need to test that | 22:39 |
| abranson | mal: yeah the hdr scene mode crashes in piggz' camera app on the xa2 | 22:39 |
| mal | ok | 22:39 |
| abranson | freezes on capture, and a few seconds later an error comes back from the hal | 22:39 |
| mal | interesting | 22:39 |
| abranson | piggz: didn't find out why yet | 22:39 |
| piggz | abranson: will you try setting some other properties with it maybe? | 22:39 |
| mal | but anyway o fp2 the app works fie ad all changes also | 22:40 |
| abranson | but redeye flash mode does it too | 22:40 |
| abranson | yeah could need some additional params | 22:40 |
| piggz | cool, so (my) mido, and fp2 are good | 22:40 |
| mal | piggz: wondering if we should add those latest modifications to qtmultimedia to common repo | 22:40 |
| mal | maybe after those are merged | 22:40 |
| piggz | mal: sure ... im building in my devel: | 22:40 |
| abranson | mal: i'll merge those tomorrow hopefully - need to run it by someine like pekka first | 22:41 |
| mal | abranson: sure, I was just thinking it would be nice to have those in my next fp2 release which I'm already testing | 22:42 |
| mal | abranson: of course I can build those in my repo | 22:43 |
| abranson | mal: ok, still need to do a bit more testing too I think | 22:44 |
| piggz | great, im all for more review/testing .. | 22:45 |
| piggz | ah great | 22:45 |
| piggz | i made my mido loose the modes at least | 22:45 |
| piggz | abranson: it was as you said | 22:46 |
| piggz | setprop persist.camera.HAL3.enabled 1 && reboot | 22:46 |
| piggz | so, to enable mode, set to 0 and reboot | 22:46 |
| abranson | some devices don't support hal1 very well anymore. couldn't use it on the xa2 | 22:46 |
| abranson | piggz: i did this horrible thing to give it iso under hal3: https://github.com/mer-hybris/android_frameworks_av/pull/4 | 22:47 |
| mal | abranson: yep, but we'll see if I'll wait for those or not | 22:48 |
| abranson | hmm no that's not the one | 22:48 |
| piggz | later gents | 22:49 |
| mal | piggz: nice work | 22:49 |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!