| T42 | <edp_17> And the build_packages.sh has completed! 😁 Now I need to flash this on my device to try the image. | 00:30 |
|---|---|---|
| r0kk3rz | DennisSwe there is a port for that | 00:47 |
| T42 | <edp_17> @Elros, you mentioned to resolve the ofono configs conflict by manual installation of droid-config. | 01:05 |
| T42 | <edp_17> The "sb -t $DEVICE-$VENDOR-armvhl -m sdk-install -R zypper in droid-config-$DEVICE" gives me a command not found. | 01:06 |
| T42 | <edp_17> Isn't it "sb2 -t $DEVICE-$VENDOR-armvhl -m sdk-install -R zypper in droid-config-$DEVICE"? | 01:06 |
| T42 | <edp_17> Based on the faq the correct syntax is : sb2 -t $VENDOR-$DEVICE-armv7hl -R -m sdk-install zypper in droid-config-$DEVICE | 01:22 |
| T42 | <edp_17> However this gives me : "No update candidate for 'droid-config-hammerhead-1-1.armv7hl'. The highest available version is already installed." | 01:22 |
| T42 | <elros34> @edp_17 did you put these obsoletes, providesentries back to spec file and rebuild droid-config first? | 01:39 |
| T42 | <edp_17> Nope, the Obseletes part is commented out. | 01:40 |
| T42 | <edp_17> The Provides is there. | 01:40 |
| T42 | <edp_17> What's the default ftp port? I cannot ftp in with filezilla on port 21. | 01:44 |
| T42 | <edp_17> Yeah, firewall issue. As this is a new linux installation. | 01:45 |
| T42 | <edp_17> I remember I needed to switch something off on my old linux install. | 01:45 |
| T42 | <edp_17> Solved. I needed to use port 22. | 01:46 |
| T42 | <edp_17> Okay, now I am tired again. I managed to fix my pc and re-create Platform/chroot and download/compile the kernel (cm-12.1), built hybris-hal and packages and the sfos 3.2.1.20 image. My hammerhead boots up but stuck at the google logo screen. (I have de ja vu as this reminds me my S7's behaviour.) I can ssh in but not sure the rest. To | 01:56 |
| T42 | morrow I'll continue if I am not too tired. Thanks for help. Have a good night. | 01:56 |
| T42 | <Dominic %lastname%> (Photo, 471x543) https://irc.thaodan.de/.imgstore/WpBM1cu6Mh.png [高仿鞋出售:@gaofanxie]🥺电报/potato土豆/微信/Facebook/Twitter增粉🥺电报微信群推广🥺非小号,mytoken关注🥺微信群电报群群活跃度管理,水军 👀联👀系: @Hyinp | 03:25 |
| T42 | <DennisSwe> @r0kk3rz [DennisSwe there is a port for that], The one that i can found is on xda, but the links to the image / file does not work. | 08:01 |
| T42 | <DennisSwe> Any onther sites where i can get the files? | 08:01 |
| r0kk3rz | was it on devaamo? | 08:03 |
| r0kk3rz | you can grab a build from here https://gitlab.com/sailfishos-porters-ci/bullhead-ci/pipelines | 08:04 |
| T42 | <DennisSwe> @r0kk3rz [was it on devaamo?], Yesbox, the browser did not load the page... :) thank you for the other one! | 10:43 |
| r0kk3rz | yeah i think that server is proper dead, which is a shame because it had a number of sailfish images | 10:54 |
| T42 | <DennisSwe> @r0kk3rz [yeah i think that server is proper dead, which …], Aah that's too bad... So much work behind it. | 14:44 |
| T42 | <DennisSwe> Is there a toturial about how to install that bullhead image? | 14:44 |
| KALUBE | mal: I've managed to fix data on OnePlus 6 - In data settings the button to enable data is greyed out, however if I turn off wifi and use the "connect to internet" dropdown in WLAN settings, tapping SIM 1 enables data, 4G appears in the status bar and it works just fine. Could this be a bug in the mobile network settings page? | 14:57 |
| mal | KALUBE: did you select the sim card to use from settings? | 15:05 |
| mal | afaik the enabling of mobile network is not active unless you select a sim card to use, at least on dual-sim devices | 15:06 |
| KALUBE | mal: There was no options to select a SIM card iirc, only one SIM was inserted so my guess is it removed that option. Could I be missing something in my ril_subscription.conf? https://git.io/JvfGI | 15:11 |
| mal | KALUBE: if that is dual-sim device then this should be installed https://github.com/sailfish-oneplus6/droid-config-enchilada/blob/hybris-16.0/patterns/jolla-configuration-enchilada.yaml#L19 if the | 15:15 |
| mal | KALUBE: also on modern devices with enough memory I suggest enabling https://github.com/sailfish-oneplus6/droid-config-enchilada/blob/hybris-16.0/patterns/jolla-configuration-enchilada.yaml#L38 | 15:16 |
| KALUBE | oh wow, will enable that... thanks | 15:25 |
| mal | KALUBE: you didn't read faq about dual-sim? | 15:26 |
| KALUBE | Don't think so, didn't occur to me | 15:28 |
| mal | although it seems that part could need some improvements | 15:28 |
| KALUBE | It could probably use it's own section rather than being in the "ofono doesn't work" section | 15:31 |
| mal | yep | 15:31 |
| mal | also might need some instructions for binder based ril plugin | 15:32 |
| mal | pull requests are welcome to the faq | 15:32 |
| KALUBE | mal: made a PR for the FAQ, also if you have a chance there's a PR waiting to add enchilada to hybris-boot https://git.io/JvfZK | 16:02 |
| mal | KALUBE: you should also add a note about binder things to the first sim config, also maybe some note about the ofono-ril-binder-plugin package for binderized devices in patterns | 16:16 |
| T42 | r %lastname% was added by: r %lastname% | 17:18 |
| mal | KALUBE: you should fix the commit message in that hybris-boot PR to follow the message format used for those, so git commit --amend and then edit the commit message and save and finally force push to the same branch you used in that PR | 17:35 |
| KALUBE | mal: fixed the commit message | 19:10 |
| *** Piece_Maker is now known as Acou_Bass | 19:21 | |
| mal | KALUBE: please fix the indentation in the changes, the line containing "enchilada") does have the same indentation as the entries of other devices | 19:29 |
| mal | sorry that I missed that before | 19:29 |
| *** ahjolinna_ is now known as ahjolinna | 20:34 | |
| T42 | Mignon %lastname% was added by: Mignon %lastname% | 23:40 |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!
