| mal | good | 00:25 |
|---|---|---|
| T42 | <Anna %lastname%> (Photo, 720x1280) https://irc.thaodan.de/.imgstore/zYll0zB1wq.png @yx34567 | 02:55 |
| T42 | 温雅筐 %lastname% was added by: 温雅筐 %lastname% | 07:47 |
| T42 | Wayne %lastname% was added by: Wayne %lastname% | 08:04 |
| T42 | <Szancso %lastname%> Dt2w works too, I created a doubletap.ini file. | 08:05 |
| T42 | <Szancso %lastname%> Another problem is that when I plug in the headphone jack, nothing happens, the headset doesn't sound, and I don't turn off the speaker. | 08:08 |
| T42 | Martina %lastname% was added by: Martina %lastname% | 08:13 |
| T42 | <edp_17> It seems on my S2 there is no notification led at all. In one android rom I remember the two softbuttons at the bottom were used as notification led (blinking white if there was incoming message). Is it possible to do something similar in Sailfish? If yes can you advise how to do it, please? Thanks. | 08:30 |
| T42 | <edp_17> Szancso : Try this: https://github.com/mer-hybris/hadk-faq/blob/master/README.rst#audio-not-routed-to-headphones | 08:32 |
| T42 | <Szancso %lastname%> @edp_17 [It seems on my S2 there is no notification led …], Thanks, in the meantime I found it, half way it works. :) | 08:50 |
| T42 | <Szancso %lastname%> https://together.jolla.com/question/197811/35mm-audio-connector-not-working-on-xa2/?sort=votes&page=1#197869 | 08:55 |
| T42 | <Szancso %lastname%> Working the headset, and now working the FM Radio too. :) | 09:07 |
| T42 | Drew %lastname% was added by: Drew %lastname% | 09:10 |
| T42 | <edp_17> Congrats. | 09:10 |
| T42 | <Szancso %lastname%> @edp_17 [It seems on my S2 there is no notification led …], I think you are trying to do what T42 suggested to me, only giving the softkey location to / sys / class / ... in the 60-white.ini file. Just guessing. | 09:13 |
| T42 | <Szancso %lastname%> And thanks! | 09:13 |
| T42 | <Szancso %lastname%> Are you Hungarian? :) | 09:14 |
| T42 | <edp_17> Szancso : yep, I am and based on your name I think you are too. 😉 | 09:15 |
| T42 | <Szancso %lastname%> Yes! :)))) | 09:16 |
| T42 | <Szancso %lastname%> Emlékeztetőül (jack): Ki kellett cserélnem az event7 -et event4-re, itt: | 09:20 |
| T42 | <Szancso %lastname%> [nemo@Sailfish ~]$ cat /etc/ohm/plugins.d/accessories.ini | 09:20 |
| T42 | <Szancso %lastname%> eci-probe-delay = 2500 | 09:20 |
| T42 | <Szancso %lastname%> disable-incompatible-quirk = true | 09:20 |
| T42 | <Szancso %lastname%> jack-match = msm8953-snd-card-mtp Headset Jack | 09:20 |
| T42 | <Szancso %lastname%> jack-device = /dev/input/event4 | 09:20 |
| T42 | <Szancso %lastname%> Sorry: As a reminder (jack): I had to change event7 to event4 here: | 09:21 |
| T42 | <edp_17> Yeah, I remember that on the hammerhead. Fortunately that guide is very good. | 09:24 |
| T42 | <Szancso %lastname%> Everything on the phone is working except video playback. They play one or two videos, but not most. You have a problem with the venus codec or the kernel. | 09:30 |
| T42 | <Szancso %lastname%> Of course, this is a funny port, mido sailfish runs on ugglite phone, with santoni-ugglite kernel. It's also a miracle that works. :) | 09:30 |
| T42 | <edp_17> Congrats. What android base does it use? | 09:31 |
| T42 | <Szancso %lastname%> ugglite 7.1.2 | 09:32 |
| T42 | <edp_17> So technically it is Los 14.1. Thanks. | 09:35 |
| T42 | <Szancso %lastname%> Yes, sorry LOS 7.1.2. | 09:35 |
| T42 | <Szancso %lastname%> What is "Hail sensor"? | 09:36 |
| T42 | <edp_17> I don't know. | 09:36 |
| T42 | <Szancso %lastname%> Oh, I can't read it, it has a hall sensor. :D | 09:39 |
| T42 | <Szancso %lastname%> Wow, it mounted otg ext2/and/ntfs pendrive. Super. :) | 09:41 |
| T42 | 贾沐霞 %lastname% was added by: 贾沐霞 %lastname% | 09:43 |
| rinigus | As I think that this room has the most expertise on such matters, I'd like to ask for help with XA2 support for Flatpak. | 12:11 |
| rinigus | As tried by coderus, flatpak apps hang on XA2 (with fixed hybris) without showing any windows | 12:11 |
| rinigus | Error appears in logcat (http://talk.maemo.org/showpost.php?p=1565830&postcount=99) | 12:11 |
| rinigus | strace is available at https://gist.github.com/CODeRUS/add4f008e0d4998c66c89520736ab9e9 | 12:11 |
| rinigus | on Sony XZ2 (aosp9) all works as expected. I wonder if I miss something in config that's used by XA2 | 12:12 |
| mal | hall sensor is the magnetic lid sensor to turn off display when a device cover is closed | 12:22 |
| T42 | <elros34> rinigus: pure guess: shoudn't it use gralloc.sdm660.so if it's available? https://github.com/mer-hybris/droid-vendor-sony-nile-pioneer/tree/master/sparse/vendor/lib/hw | 12:23 |
| rinigus | @elros34: no idea. I don't have a strace for SFOS apps in XA2, will ask for it. | 12:24 |
| T42 | <edp_17> @mal : Do you have an idea for this?: | 12:33 |
| T42 | <edp_17> It seems on my S2 there is no notification led at all. In one android rom I remember the two softbuttons at the bottom were used as notification led (blinking white if there was incoming message). Is it possible to do something similar in Sailfish? If yes can you advise how to do it, please? Thanks. | 12:33 |
| mal | read the discussion for yesterday evening about leds | 12:44 |
| mal | *from yesterday evening | 12:44 |
| T42 | <edp_17> Thanks, I read that. Probably I missed something so I read again. | 12:46 |
| T42 | <edp_17> Well, I read that but still not clear. That all was about a device that has LED in it. This my one does not have led at all. Therefore /sys/class/leds path do not exist. | 12:52 |
| mal | not sure then what you meant by the buttons | 13:13 |
| rinigus | mal: he has physical buttons with leds on the phone. I guess he wants to use the leds of those buttons for notification as no other leds are available | 13:22 |
| T42 | <edp_17> Thanks @rinigus, something like that, except those are not physical buttons but touch areas at the left and right to the physical home button. And they have lights to turn on or off. | 13:27 |
| T42 | <edp_17> Actually the one on the right currently works as back button or cancel. I am not sure why though. | 13:28 |
| T42 | <edp_17> Oh one more thing, those are not part of the screen. | 13:29 |
| mal | rinigus: then the question is how those are controlled? maybe some backlight thingy? | 13:30 |
| T42 | <edp_17> I don't know. Both of them are black and remain black on touch too. | 13:31 |
| T42 | <edp_17> I think on android the left one is worked as recent app button and other one as back button. | 13:33 |
| mal | you need to figure out how the backlight of those is controlled in android | 13:36 |
| T42 | <edp_17> So, do I need to install back that android rom, then find out? | 13:37 |
| mal | I would check the sources | 13:51 |
| T42 | <edp_17> I found this: https://github.com/LineageOS/android_device_samsung_i9100/commit/e0be1bc3ff1f86796df64dfd58a43c5582e2bb5a | 13:59 |
| T42 | <edp_17> However this is for cm-14.1 | 13:59 |
| T42 | <edp_17> Then there are other commits for enabling BLN and blinking. | 14:00 |
| mal | so do you see that /sys/class/sec/sec_touchkey/brightness on the device? | 14:28 |
| mal | or /sys/class/sec/led/ | 14:29 |
| T42 | <edp_17> The /sys/class/sec/sec_touchkey/brightness is there. The /sys/class/sec/led is not. | 14:33 |
| T42 | <edp_17> And seemingly I have found the relevan kernel changes too (5 commits in the los 14.1 kernel for this device). All of them by rINanDO and around the BLN. | 14:36 |
| mal | did you try what that /sys/class/sec/sec_touchkey/brightness does? | 14:52 |
| T42 | <edp_17> Not yet. How should I do? | 14:55 |
| mal | write a value to it with "echo 255 > /sys/class/sec/sec_touchkey/brightness" and see what happens | 15:02 |
| T42 | <edp_17> When I put 255 in there nothing happened. When I put 1, both keys lit up. When I put 0, they did not go blank. When I put the phone sleep, both went black and remained black even if I woke the screen up again. | 16:05 |
| rinigus | for reference: Flatpak contained hybris did not have access to /plat_property_contexts and /nonplat_property_contexts in XA2 messing up property detection and loading wrong gralloc as a result. sounds like its fixed now, will have to update flatpak-runner though. | 18:24 |
| T42 | <adampigg> rinigus: awesome | 20:14 |
| rinigus | adampigg: we will probably get more bugs due to some missing folder(s), but when alert, its easy to fix. | 20:17 |
| rinigus | let's see how it goes when the next sfos release will be out with new libhybris | 20:17 |
| T42 | <edp_17> @rinigus: congrats on the Flatpak work! Do we know when the next sfos will come? | 21:04 |
| rinigus | no, we don't. but translations are out => shouldn't be toooo far. | 21:13 |
| rinigus | @edp_17 ^ | 21:13 |
| T42 | <edp_17> @rinigus: Thanks. | 21:14 |
Generated by irclog2html.py 2.17.1 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!
